www.FraenOMG.com 1/7 FML Series for Seoul Semiconductor P5 II, Z6 Rev 00

FML Series Color Mixing Lens

For Seoul Semiconductor RGB P5 II and RGBW Z6

LEDs

 High efficiency

 4 beams available

 Excellent color mixing

The FLM series lens is designed to provide

excellent color mixing and lighting efficiencies

when used multi-chip Z Power P5 II RGB and Z6

RGBW LEDs from Seoul Semiconductor.

A software-optimized aspheric profile, coupled

with beam shaping output faces, enables the

generation of four different output patterns:

narrow, medium, wide and elliptical.

The excellent uniformity of the color mixing allows

these lenses to be used in a variety of

applications.

Target applications are:

 Architectural lighting

 Entertainment lighting

 RGB illumination

 Retail lighting

 General illumination

Z Power, P5 II and Z6 are trademarks of Seoul

Semiconductor Co., Ltd. For technical

specification on the LEDs please refer to the P5 II

or Z6 LED datasheet or visit

http://www.seoulsemicon.com/en/html/main/

FRAEN Corporation OMG FRAEN Corporation Srl

80 Newcrossing Road Via delle Querce, 26

Reading MA 01867 27020 Trivolzio (PV)

USA Italy

Phone: +1 781.205.5300 Phone: +39 0382 1933.1

Fax: +1 781.942.2426 Fax: +39 0382 1933.239

Inquiries: optics@fraen.com

Website: FraenOMG.com

For ordering or sales information in your region,

please contact one of our offices listed above or

visit www.FraenOMG.com/Contact.

www.FraenOMG.com 2/7 FML Series for Seoul Semiconductor P5 II, Z6 Rev 00

General Characteristics

Materials

Lens Material Optical Grade PMMA

Holder Material Polycarbonate: Black

Operating Temperature range -40° C / + 80° C

Storage Temperature range -40° C / + 80°C

Average transmittance in visible spectrum (400 – 700nm) >90%, as measured using

3mm thick Optical Grade PMMA.

Please note that flow lines and weld lines on the external surfaces of the lenses are

acceptable if the optical performance of the lens is within the specification described in

the section “OPTICAL CHARACTERISTICS”

IMPORTANT NOTE – Lenses handling and cleaning:

 Handling: Always use gloves to handle lenses and/or handle the lenses only by

the flange. Never touch the outside surfaces of the lenses with fingers; finger oils

and contamination will absorb or refract light.

 Cleaning: Clean lenses only if necessary. Use only soap and water to clean the

surfaces and lenses. Never expose the lenses to solvents such as alcohol, as it

will damage the plastic.

Scope

This datasheet provides information about the FML series lenses for arrays of LUXEON Z

LEDs.

 FML-S1-R Spot Lens

 FML-N1-R Narrow Lens

 FML-M1-R Medium Lens

 FML-W1-R Wide Lens

And lens assemblies (lenses in black holders)

 FML-S1-MLB Spot Lens in a Holder

 FML-N1-MLB Narrow Lens in a Holder

 FML-M1-MLB Medium Lens in a Holder

 FML-W1-MLB Wide Lens in a Holder