HVC
+ + + + +
Type Case Size TCR Value Tolerance Termination
High-Voltage
Chips
See dimension
table.
Custom case
sizes are
available.
Please consult
factory.
E ±25ppm/°C
H ±50ppm/°C
K ±100ppm/°C
L ±200ppm/°C
Resistance value
expressed as a
four digit number,
where the rst
three numbers are
the signicant
value, and the
fourth number is
the number of
zeroes.
B ±0.1%
C ±0.25%
D ±0.5%
F ±1.0%
G ±2.0%
J ±5.0%
K ±10%
L ±20%
T Solderable wraparound
mae n Sn99.9 on nickel
barrier, RoHS
B Solderable wraparound
Sn63Pb37 solder over
nickel barrier
Z Solderable single surface
n Sn99.9 on nickel
barrier, RoHS
S Solderable single surface
Sn63Pb37, ip-chip
G Wire bondable gold, Au,
RoHS
The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.
Standard case sizes: 0402, 0403, 0502, 0504, 0603, 0805, 1004, 1005, 1206, 1210, 1505, 2010, 2208, 2510, 2512, 3512, 4020, 5020.
For custom sizes and congurations, consult factory.
How to Order
HVC Series
High Voltage Chip Resistors
Case Size TCR Tolerance
Rangs
(±ppm/°C)
0.10% 0.25% 0.50% 1% 2% 5% 10% 20%
0402
40mW
150V
50
10K-100M 10K-100M 10K-100M 10K-100M 10K-100M
100
10K-500M 10K-500M 10K-500M 10K-500M 10K-500M
200
10K-500M 10K-1G 10K-1G 10K-1G 10K-1G
0603
60mW
400V
50
10K-10M 10K-100M 10K-500M 10K-500M 10K-500M 10K-500M
100
10K-10M 10K-500M 10K-1G 10K-1G 10K-1G 10K-1G
200
10K-10M 10K-500M 10K-1G 10K-1G 10K-10G 10K-50G
0805
200mW
600V
50
10K-10M 10K-500M 10K-500M 10K-500M 10K-500M 10K-500M
100
10K-10M 10K-1G 10K-1G 10K-1G 10K-1G 10K-1G
200
10K-10M 10K-1G 10K-1G 10K-10G 10K-10G 10K-50G
1206
330mW
1500V
25 1M-10M 1M-100M 1M-100M 1M-100M 1M-100M 1M-100M 1M-100M 1M-100M
50 100K-10M 100K-100M 100K-500M 100K-500M 100K-500M 100K-500M 100K-500M 100K-500M
100 10K-10M 10K-100M 10K-500M 10K-1G 10K-1G 10K-1G 10K-1G 10K-1G
200 10K-10M 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 10K-50G
2010
1W
2000V
25 1M-10M 1M-100M 1M-100M 1M-100M 1M-100M 1M-100M 1M-100M 1M-100M
50 100K-10M 100K-100M 100K-500M 100K-500M 100K-500M 100K-500M 100K-500M 100K-500M
100 10K-10M 10K-100M 10K-500M 10K-1G 10K-1G 10K-1G 10K-1G 10K-1G
200 10K-10M 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 10K-50G
2512
2W
3000V
25 1M-100M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M
50 100K-100M 100K-500M 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G
100 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-10G 100K-10G
200 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-50G 100K-50G
3512
2W
3500V
25 1M-100M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M
50 100K-100M 100K-500M 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G
100 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-10G 100K-10G
200 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-50G 100K-50G
4020
2W
4000V
25 1M-100M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M
50 100K-100M 100K-500M 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G
100 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-10G 100K-10G
200 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-50G 100K-50G
25 1M-100M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M
5020
2W
5000V
50 100K-100M 100K-500M 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G
100 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-10G 100K-10G
200 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-50G 100K-50G
• Ultra High Stability
• Very Low Noise
• Tolerances to 0.1%
• TCR to 25 ppm/°C
• VCR to 1 ppm/V
• Custom Congurations
Advantages
Our patented Micropen® precision printing technology provides superior precision, thick-lm high voltage surface
mount resistors. Ohmcraft’s Micropenned serpentine patterned resistors produce superior electrical characteristics:
Electrical Specications
Rev 1801
• Voltage Ratings to 5000 Volts
• Resistance Values to 50 Gigohms
Packaging options: Bulk, Tape & Reel or Flat Pack
Test Maximum ∆R
Short Time Overload 0.1%
Load Life 0.1%
Temperature Cycle 0.1%
Moisture Resistance 0.1%
Shock 0.05%
Vibraon 0.05%
Dielectric Withstanding Voltage 0.05%
Resistance to Soldering Heat 0.05%
Material Construction
Resistive Element Thick Film
Substrate 96% Alumina
Encapsulation Epoxy
Termination Tin over nickel barrier, lead solder
over nickel barrier, or gold.
Custom Congurations
Available Upon Request
Please consult with our knowledgeable sales
staff for help specifying custom parts to meet
your needs:
E: sales@ohmcraft.com
P: 585.624.2610
www.ohmcraft.com
93 Paper Mill St.
Honeoye Falls, NY 14472
Chip Dimensions
Wrap-around
B and T Terminations
Bondable
G, Z, and S Terminations
Case Size
Length
Width
Thickness
(Max.)
DT
DB
Units
0402
0.040 ±0.005
1.02 ±0.13
0.020 ±0.003
0.51 ±0.08
0.020
0.51
0.008 ±0.004
0.20 ±0.10
0.010 +0.002/-0.004
0.25 +0.05/-0.10
inches
mm
0603
0.063 +0.01/-0.005
1.60 +0.25/-0.13
0.031 ±0.005
0.79 ±0.13
0.020
0.51
0.010 ±0.005
0.25 ±0.13
0.012 ±0.008
0.30 ±0.20
inches
mm
0805
0.079 +0.01/-0.005
2.01 +0.25/-0.13
0.050 ±0.005
1.27 ±0.13
0.025
0.64
0.010 ±0.005
0.25 ±0.13
0.013 ±0.008
0.33 ±0.20
inches
mm
1206
0.126 +0.01/-0.005
3.20 +0.25/-0.13
0.063 ±0.005
1.60 ±0.13
0.030
0.76
0.010 ±0.005
0.25 ±0.13
0.020 ±0.010
0.51 ±0.25
inches
mm
2010
0.200 +0.01/-0.005
5.08 +0.25/-0.13
0.100 ±0.005
2.54 ±0.13
0.030
0.76
0.018 ±0.010
0.46 ±0.25
0.020 ±0.010
0.51 ±0.25
inches
mm
2512
0.250 +0.01/-0.005
6.35 +0.25/-0.13
0.125 ±0.005
3.18 ±0.13
0.030
0.76
0.020 ±0.010
0.51 ±0.25
0.024 ±0.010
0.61 ±0.25
inches
mm
3512
0.350 +0.01/-0.005
8.89 +0.25/-0.13
0.125 ±0.005
3.18 ±0.13
0.030
0.76
0.020 ±0.010
0.51 ±0.25
0.024 ±0.010
0.61 ±0.25
inches
mm
4020
0.400 +0.01/-0.005
10.16 +0.25/-0.13
0.200 ±0.005
5.08 ±0.13
0.030
0.76
0.025 ±0.010
0.64 ±0.25
0.030 ±0.010
0.76 ±0.25
inches
mm
5020
0.500 +0.01/-0.005
12.70 +0.25/-0.13
0.200 ±0.005
5.08 ±0.13
0.030
0.76
0.025 ±0.010
0.76 ±0.25
0.030 ±0.010
0.76 ±0.25
inches
mm
Typical Performance Characteristics
Power Derating Curve
Ambient Temperature °C
150
100
50
0
% of Rated Power
25
50
150
75
125
100
Other available case sizes: 0403, 0502, 0504, 1004, 1005, 1210, 1505, 2208, 2510, and custom. Please consult factory.
Parameter Typical
Operang Temperature -55°C to 150°C
TCR Measured from 25°C to 75°C
Pulse Capability
10X rated waage
For custom pulse applicaons consult factory
Resistance Value
Values > 10M are measured at 100 VDC
For custom test voltages consult factory
HVC Series
Tape and Reel Specications
Parts are packaged in accordance with
EIA-481 tape and reel specications.
Rev 1801