SCALE™-2+ 2SC0106T2A1-12, 2SC0106T2A1C-12
Preliminary Data Sheet
www.power.com/igbt-driver Page 2
Safety Notice!
The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high-
voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory!
Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive
devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the
workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged.
Important Product Documentation
This data sheet contains only product-specific data. For a detailed description, must-read application notes and
important information that apply to this product, please refer to “2SC0106T Description & Application Manual”
on www.power.com/igbt-driver/go/2SC0106T.
Absolute Maximum Ratings
Parameter Remarks Min Max Unit
Supply voltage V
CC
VCC to GND 0 16 V
Logic input and output voltages Primary side, to GND -0.5 VCC+0.5 V
SO current Failure condition, total current 20 mA
Gate peak current I
out
Note 1 -6 +6 A
External gate resistance Turn-on and turn-off, switching frequency ≤ 25 kHz 2.5 Ω
Turn-on and turn-off, switching frequency > 25 kHz 5 Ω
IGBT gate charge Notes 12 8 µC
Average supply current I
CC
Notes 2, 3 300 mA
Output power Ambient temperature <70°C (Note 4) 1.2 W
Ambient temperature <85°C (Notes 4, 5) 1.0 W
Ambient temperature <105°C (Notes 4, 5) 0.35 W
Test voltage (50Hz/1min.) Primary to secondary (Note 16) 4000 V
AC(eff)
Secondary to secondary (Note 16) 4000 V
AC(eff)
Switching frequency f 50 kHz
|dV/dt| Rate of change of input to output voltage 50 kV/μs
Operating voltage Primary/secondary, secondary/secondary 1200 V
peak
Operating temperature Note 5 -40 105 °C
Storage temperature Note 20 -40 50 °C
Surface temperature Only for 2SC0106T2A1C-12 (Note 21) 125 °C