Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or
reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its
documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made
or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result
of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use
in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in
personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to
use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices
International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered
Company Number: SC136640
Copyright © Bridgetek Limited 1
VI800A_RELAY Datasheet
Version 1.3
Document Reference No.: BRT_000008 Clearance No.: BRT #012
FTDI Chip
VI800A-RELAY Datasheet
Plug in accessory for
VM800P Embedded Video
Engine
Plus module
1 Introduction
The VI800A-RELAY is a plug in accessory for the
VM800P Plus module, which is used to develop and
demonstrate the functionality of the FT800
Embedded Video Engine, EVE.
This module behaves as an SPI to relay bridge for
the VM800P Plus module.
1.1 Features
Connects to the VM800P Plus module using SPI
slave interface
SPI slave interface is converted to relay interface
4 Opto-isolated Inputs and 4 Relay outputs
8 LEDs to indicate the input and output status
Screw connector to connect the relay inputs and
relay outputs