114-32144
Rev A
2. REFERENCE MATERIAL
2.1. Revision Summary
Initial release of application specification
2.2. Customer Assistance
Reference Product Base Part Numbers 2226880 and 2226881, and Product Code J547 are representative of
the TE VITA 66.4 Fiber-Optic Connectors. Use of these numbers will identify the product line and help you to
obtain product and tooling information when visiting www.te.com or calling the number at the bottom of page 1.
2.3. Customer Drawings
Customer drawings for product part numbers are available from www.te.com. If there is a conflict between the
information contained in the Customer Drawings and this specification or with any other technical
documentation supplied, the information contained in the Customer Drawings takes priority.
2.4. Specifications
Product Specification 108-2467-1 provides product performance requirements and test information for the
TE VITA 66.4 Fiber-Optic Connectors installed with standard-grade, Multi-Mode, 12-position MT ferrules.
Qualification Test Report 501-134012-1 confirms successful qualification per the information in 108-2467-1.
2.5. Instructional Material
Instruction sheets (408-series) provide product assembly instructions or tool setup and operation procedures.
Instruction sheets available that pertain to this product are:
Document Number Document Title
408-8922 Cleaning and Inspection for Physical Contact Fiber-Optic Connectors
2.6. Standards and Publications
ANSI/VITA 46.0, “VPX Baseline Standard”, developed by the VMEbus International Trade Association (VITA)
describes the VITA 46 VPX family of standards for VMEbus systems for the provision of high-speed
interconnects in harsh-environment applications.
ANSI/VITA 47, “American National Standard for Environments, Design and Construction, Safety and Quality for
Plug-In Units Standard”, developed by VITA, defines environmental, safety, and quality requirements for
commercial-off-the-shelf (COTS) plug-in units (cards, modules, etc.) intended for mobile applications.
ANSI/VITA 48.1, “Mechanical Specification for Microcomputers Using REDI Air Cooling”, developed by VITA,
defines the mechanical requirements that are needed to ensure the mechanical interchangeability of air-cooled
3U and 6U plug-in units and define the features required to achieve two level maintenance compatibility.
ANSI/VITA 48.2, “Mechanical Specification for Microcomputers Using REDI Conduction Cooling Applied to
VITA VPX”, developed by VITA, defines the mechanical requirements that are needed to ensure the
mechanical interchangeability of air-cooled 3U and 6U plug-in units and define the features required to achieve
two level maintenance compatibility.
ANSI/VITA 66.0, “Optical Interconnect on VPX - Base Standard”, developed by VITA, defines a family of blind-
mate fiber-optic interconnects for use with VPX backplanes and plug-in modules.
ANSI/VITA 66.4, “Optical Interconnect on VPX – Half Width MT Variant”, developed by VITA, defines the half-
size fiber-optic interconnect variant for the MT style contact.
IEC 61755-3-31, “Fiber-Optic Connector Optical Interfaces - Part 3-31”, which defines the MT ferrule end face
geometry requirements.
IEC 61754-5, “Fiber-Optic Connector Interfaces - Part 5: Type MT Connector Family”, which defines the
standard interface dimensions for the type MT family of connectors.