Application Specification

1 of 8

*Trademark

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.

PRODUCT INFORMATION

1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com.

114-13252

29 JAN 16 Rev G

NOTE

All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters. Unless

otherwise specified, dimensions have a tolerance of ±0.13 and angles have a tolerance of ±2°. Figures and illustrations are

for identification only and are not drawn to scale.

1. INTRODUCTION

This specification covers the requirements for the application of the Wire-to-Board Connectors which mate with

Hermaphroditic Blade and Receptacle SMT Connectors. The contacts will accept stranded copper wire with a

wire size range of 22-18 AWG. The contacts feature a locking lance to engage the housing and require no

insertion tooling. Once terminated, the contacts are inserted into the BACK of the housings. The housings have

single row cavities with a centerline spacing of 4.00 mm and are available in 2, 4, and 6 positions. The housing

is available in two colors, natural and black. The housing has a latch which engages with a tab on the

Hermaphroditic Blade and Receptacle Connector.

When corresponding with TE Connectivity Personnel, use the terminology provided on this specification to help

facilitate your inquiry for information. Basic terms and features of components are provided in Figure 1.

Figure 1

2. REFERENCE MATERIAL

2.1. Revision Summary

 Added new artwork to Figure 1 and new Paragraph 3.1 and renumbered

2.2. Customer Assistance

Reference Product Base Part Number 2058299 and Product Code L012 are representative numbers of the

Wire-to Board Connector. Use of these numbers will identify the product line and help you to obtain product

and tooling information when visiting www.te.com or calling the number at the bottom of page 1.

2.3. Drawings

Customer drawings for product part numbers are available from www.te.com. Information contained in the

customer drawing takes priority.

2.4. Specifications

Product Specification 108-2387 provides product performance and test results. Application Specification

114-13225 provides information on Hermaphroditic Blade and Receptacle Connectors.

Wire-to-Board Connector

for Hermaphroditic Blade and

Receptacle SMT Connectors

Housing

Blade Contact

Socket Contact

Locking Latch

Refer to Application Specification

114-13225 for Application

Requirements for the

Hermaphroditic Blade and

Receptacle Connector

Locking Latch

Housing

114-13252

Rev G

2 of 8

2.5. Instructional Material

Instruction sheets (408-series) provide product assembly instructions or tooling setup and operation procedures

and customer manuals (409-series) provide machine setup and operating procedures. Instructional material

that pertain to this product are:

Document Number Document Title

408-3295 Preparing Reel of Contacts for Application Tooling

408-7424 Checking Terminal Crimp Height Gaging Die Closure

408-9040 Heavy Duty Miniature Quick-Change Applicators (Side Feed Type)

408-9816 Handling of Reeled Products

408-10290 PRO-CRIMPER* III Hand Tool Assembly 2063778-1 with Die Assembly 2063778-2

409-5842 AMP-O-LECTRIC* Model “G” Terminating Machine 354500-[ ]

3. REQUIREMENTS

3.1. Safety

Do not stack product shipping containers so high that the containers buckle or deform.

3.2. Storage

A. Reeled Storage

When using reeled contacts, store coil wound reels horizontally and traverse wound reels vertically.

B. Ultraviolet Light

Prolonged exposure to ultraviolet light may deteriorate the chemical composition used in the product

material.

C. Shelf Life

The product should remain in the shipping containers until ready for use to prevent deformation to

components. The product should be used on a first in, first out basis to avoid storage contamination that

could adversely affect performance.

D. Chemical Exposure

Do not store product near any chemical listed below as they may cause stress corrosion cracking in the

material.

Alkalies Ammonia Citrates Phosphates Citrates Sulfur Compounds

Amines Carbonates Nitrites Sulfur Nitrites Tartrates

3.3. Wire Size and Preparation

Contacts are available for the wire sizes specified in the table in Figure 2. Insulation shall be stripped for a

length of 2.20-2.60 mm.

WIRE (Stranded Only)

WIRE BARREL CRIMP

WIZE (AWG)

INSULATION DIAMETER

HEIGHT ±0.05

WIDTH (Ref)

1.65-2.03

1.33

2.032

1.36

1.48

Figure 2

Strip Length

Conductors

Insulation