Leaet
5-1-1 Onna, Atsugi-shi, Kanagawa 243
-
8555 Japan
Phone
:
+81
-
46
-
223
-
1111 Fax
:
+81
-
46
-
296
-
1238
FiberConnect
The FiberConnect is the ultimate time saving solution for coupling unterminated ber or optical components to test
equipment. By allowing the user to perform optical measurements without terminating, which requires additional
equipment and procedures, test time can be signicantly reduced over 50% compared to other methods. The low loss and
highly repeatable connection made using the FiberConnect is similar to that of connectorized ber.
Bare Fiber Adapter
Now you can test without terminating!
Flexible for the end user
The FiberConnect contains a precision glass ferrule that is permanently aligned to a connectorized cable assembly.
Available in multiple congurations, the FiberConnect is suited for a variety of multimode or single-mode applications.
It is offered with UPC or APC polish in an assortment of connector styles. For added convenience, the FiberConnect can be
attached to a smooth surface with either the integrated magnetic mount or the supplied suction-cup base.
Easy-to-use
The FiberConnect is extremely easy-to-use — only a single drop of index matching oil is required. The ber to be tested is
stripped, and cleaned and cleaved, then inserted into the unit until the end face meets the permanentlymounted ber.
The result is a low loss, low reectance connection optimal for any testing application.
Highly repeatable
Easy-to-use
Low insertion loss and back reection
Evaluation of ber span or components without termination
Signicant reduction of test time
Features and Benets
Optical Specications
Fiber type
Single-mode: 9/125 μm
Multimode: 62.5/125 or 50/125 μm
Pigtail length 1 m
Insertion loss (Typical) <0.6 dB
Number of insertions 2000 min.
Back reectance <-50 dB
General Specications
Operating temperature -10° to +50° C (14° to 122° F)
Storage temperature -40° to +60° C (-40° to 140° F)
Connector types FC, ST, SC, D4, E2000, LC, DIN
Weight (with cable) 90 g (3.2 oz)
Unit size (D x W x H) (with suction cup) 35 x 35 x 32 mm (1.375 x 1.375 x 1.25 inches)
Case size (D x W x H) 20 x 24 x 8 cm (8 x 9.5 x 3.5 inches)
Specications
Ordering Information
Please specify the model/order number, name and quantity when ordering.
The names listed in the chart below are Order Names. The actual name of the item may differ from the Order Name.
FiberConnect-X-XXX
X = 1 = Single-mode 9/125 μm
X = 2 = Multimode 62.5/125 μm
XXX=Connector and polish
UFC = Ultra FC USC = Ultra SC UST = Ultra ST
AFC = Angled FC ASC = Angled SC
LC, D4, E2000 and DIN connectors also available.
Accessories
Replacement pigtails (3 per package)
Package Includes
• FiberConnect • Maintenance kit • Magnetic stand
• Manual • Cleaning brush • Carrying case
• Index matching oil • Spare pigtail • 90 Day limited warranty
FiberConnect
-
E
-
A
-
2
-
(1.00) 2009.7 PSD