Specification Control Drawing
Tyco Electronics Corporation
300 Constitutional Drive
Menlo Park, CA 94025 USA
Title: CGPE - HW - 12 - 0
Flexible, Commercial Grade,
Polyolefin
Tyco Electronics reserves the right to amend this drawing at
any time. Users should evaluate the suitability of the product
for their application
Document No :
CGPE-HW-12-0
Cage Code:
06090
Scale:
None
Size:
A
Rev. Date:
03-Dec-97
Rev.:
B
Sheet:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
CGPE - HW - 12 - 0
Flexible, Commercial Grade, Polyolefin
Table 1: Properties
Property Unit Requirement Test Method
*Dimensions mm ASTM D 2671
Expanded I.D 12.7 ±.75
Recovered I.D. 7.5 maximum
Recovered Wall Thickness 2.0 ± 0.1
*Tensile Strength PSI 1800 minimum ASTM D 2671
20 in./min.
*Elongation Percent 200 minimum ASTM D 2671
20 in./min.
*Longitudinal Change Percent 0 to -10 ASTM D 2671
Secant Modulus PSI 25,000 maximum ASTM D 2671
Specific Gravity -- 1.0 maximum ASTM D 792
Low Temperature Flexibility
4 hr./70°C
-- No Cracking ASTM D 2671
Procedure C
*Heat Shock
4 hr./200°C
No Dripping, Flowing or
Cracking
ASTM D 2671
Corrosion, Copper Contact
16 hr./125°C
-- No Pitting or Blackening of
Copper
ASTM D 2671
Procedure B
Heat Age, %E
168 hr./125°C
Percent 100 minimum ASTM D 2671
Dielectric Strength V/mil 500 minimum ASTM D 2671
*Acceptance Test