Please take care to follow the safety precautions below when installing and operating the Console Server:

• Do not remove the metal covers. There are no operator-serviceable components inside. Opening or

removing the cover may expose you to dangerous voltage which may cause ﬁre or electric shock. Refer all

service to Tripp Lite qualiﬁed personnel

• To avoid electric shock the power cord protective grounding conductor must be connected through to ground

• Always pull on the plug, not the cable, when disconnecting the power cord from the socket

• Do not connect or disconnect the Console Server during an electrical storm

• Also it is recommended you use a surge suppressor or UPS to protect the equipment from transients

FCC Information, Class A

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept any interference received, including interference that may

cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required

to correct the interference at his own expense. The user must use shielded cables and connectors with this equipment. Any

changes or modiﬁcations to this equipment not expressly approved by Tripp Lite could void the user’s authority to operate this

equipment.

RoHS

This product is RoHS compliant.

User Notice

All information, documentation and speciﬁcations contained in this manual are subject to change without prior notiﬁcation by

the manufacturer. The manufacturer makes no representations or warranties, either expressed or implied, with respect to the

contents hereof and speciﬁcally disclaims any warranties as to merchantability or ﬁtness for any particular purpose. Any of the

manufacturer's software described in this manual is sold or licensed `as is'. Should the programs prove defective following

their purchase, the buyer (and not the manufacturer, its distributor, or its dealer), assumes the entire cost of all necessary

servicing, repair and any incidental or consequential damages resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized modiﬁcations

to this device. It is the responsibility of the user to correct such interference. The manufacturer is not responsible for any

damage incurred in the operation of this system if the correct operational voltage setting was not selected prior to operation.