Product data sheet
Automation technology - sensors and actuators
Product description Contacts: 5, cable outlet: 4-6 mm, female angled connector, shieldable, screw terminal connection, static ring version with
die-cast threaded ring, UL approval
Area M12-A Series 713
Order number 99 1436 824 05
Illustration Scale drawing Contact arrangement
You can find the component part drawing and assembly instructions on the next page.
Technical data
General values
Connector design female angled connector
Connector locking system bolted
Termination screw clamp
Wire gauge (mm) 0,75 mm²
Wire gauge (AWG) (18)
Cable outlet 4,0 - 6,0 mm
Upper limit temperature 85 °C
Lower limit temperature -40 °C
Cable data
Approval 1 UL
Electrical values
Rated current (40 °C) 4 A (3 A UL)
Rated voltage 60 V
Rated impulse voltage 800 V
Pollution degree 3
Overvoltage category II
Insulating material group III
Volume resistivity ≤ 3 mΩ
Insulation resistance >10⁸Ω
EMC compliance shielded
Degree of protection IP67
Mechanical operation > 100 Mating cycles
Material
Contact material CuZn (brass)
Contact plating Au (gold)
Contact body material PA
Housing material Zinc die-cast nickel-plated
Date: 2018-09-17 - Page 1 of 3
Product data sheet
Automation technology - sensors and actuators
Product description Contacts: 5, cable outlet: 4-6 mm, female angled connector, shieldable, screw terminal connection, static ring version with
die-cast threaded ring, UL approval
Area M12-A Series 713
Order number 99 1436 824 05
Component part drawing
Assembly instructions / Panel cut-out
Date: 2018-09-17 - Page 2 of 3