CAM-M8
u-blox M8 Concurrent GNSS Antenna Modules
Hardware Integration Manual
Abstract
This document describes the hardware features and specifications of
the CAM‑M8 chip antenna modules, which feature the u-blox M8
concurrent GNSS engine with reception of GPS, GLONASS, BeiDou,
Galileo and QZSS signals.
www.u-blox.com
UBX-15030063 - R03
CAM-M8 - Hardware Integration Manual
UBX-15030063 - R03 Production Information Contents
Page 2 of 29
Document Information
Title
CAM-M8
Subtitle
u-blox M8 Concurrent GNSS Antenna Modules
Document type
Hardware Integration Manual
Document number
UBX-15030063
Revision and Date
R03
20-Nov-2017
Document status
Production Information
Document status explanation
Objective Specification
Document contains target values. Revised and supplementary data will be published later.
Advance Information
Document contains data based on early testing. Revised and supplementary data will be published later.
Early Production Information
Document contains data from product verification. Revised and supplementary data may be published later.
Production Information
Document contains the final product specification.
European Union regulatory compliance
CAM-M8C and CAM-M8Q comply with all relevant requirements for RED 2014/53/EU. The CAM-M8 C/Q Declaration of Conformity (DoC) is
available at www.u-blox.com within Support > Product resources > Conformity Declaration.
This document applies to the following products:
Product name
Type number
ROM/FLASH version
PCN reference
CAM-M8C
CAM-M8C-0-10
ROM SPG 3.01
UBX-16016365
CAM-M8Q
CAM-M8Q-0-10
ROM SPG 3.01
UBX-16016365
u-blox reserves all rights to this document and the information contained herein. Products, names, logos and designs described herein
may in whole or in part be subject to intellectual property rights. Reproduction, use, modification or disclosure to third parties of this
document or any part thereof without the express permission of u-blox is strictly prohibited.
The information contained herein is provided “as is” and u-blox assumes no liability for the use of the information. No warranty, either
express or implied, is given, including but not limited, with respect to the accuracy, correctness, reliability and fitness for a particular
purpose of the information. This document may be revised by u-blox at any time. For most recent documents, visit www.u-blox.com.
Copyright © 2017, u-blox AG.
u-blox is a registered trademark of u-blox Holding AG in the EU and other countries.