LEON-G100 Product Change Notification PCN – Product Change Notification
UBX-13005361 Page 1 of 4
locate, communicate, accelerate
PCN – Product Change Notification
Topic:
LEON-G100 Product Change Notification
UBX-13005361
Author:
smoi
Date:
February 3
rd
, 2014
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. © u-blox ag.
1 Affected Products
Product Name
Order Number
Type No (Old)
Type No (New)
Remarks
LEON-G100
LEON-G100-08S
LEON-G100-08S-00
LEON-G100-08S-01
LEON-G100
LEON-G100-07S
LEON-G100-07S-00
LEON-G100-07S-01
LEON-G100
LEON-G100-06S
LEON-G100-06S-00/01/50
LEON-G100-06S-02
AT&T certified
2 Type of Change
[ x ] Hardware modification
[ x ] Firmware update
[ ] Others, __________________________________________________________
3 Description of Change
Due to the end-of-life of the power amplifier (PA) used within the LEON-G100 product family, the new products
LEON-G100-08S-01, LEON-G100-07S-01 and LEON-G100-06S-02 supporting a new power amplifier have been
released.
Due to the PA change, the FCC ID and IC ID have changed (addition of “N”), as in the below tables:
Old FCC ID
New FCC ID
XPYLEONG100
XPYLEONG100N
Old IC ID
New IC ID
8595A-LEON-G100
8595A-LEON-G100N
If applicable, the label on the customer device and documentation must be updated in order to report the
correct FCC/IC IDs.
The notified body ID associated with the CE mark and printed on the label (see LEON-G100 picture further down
in this document) has changed too.
LEON-G100-06S-02 is AT&T certified and is recommended for applications already AT&T certified.
LEON-G100 Product Change Notification PCN – Product Change Notification
UBX-13005361 Page 2 of 4
locate, communicate, accelerate
3.1 LEON-G100-08S-01 new features and improvement
The new features and improvements below have been implemented (with respect to LEON-G100-08S).
3.1.1 New features
InBand modem implementation, including new command +CECALL (equivalent to +UECALLTYPE), as
specified by 3GPP
3G SIM (USIM) support implementation
+CSQ reports BER even during GPRS data connection
+COPS and +CGED now provide network information without textual information, to allow parsing
with a basic CPU
3.1.2 General Improvements
AT+CSQ works even when the SIM card is not inserted
Several improvements on circuit switch data calls (CSD)
+USORD creates a new socket even if the previous one was closed without reading the residual data in
the buffer [14575]
+CMUX improved when the baud-rate is different than 115200 [14798]
+USOCO works properly, also when the assigned IP address ends with “255” (e.g. x.y.z.255) [12694]
+COPS=5 now returns MNC=”01” and not “1” when the first digit of the MNC is “0” [10951]
+CCLK behaviour improved to always provide correct time information [11321]
Mobile originated circuit switch data calls can be terminated after the module outputs the “CONNECT
9600” message, via ATH command [12289]
When LEON controls the GNSS receiver via tunnelling through the I2C connection, it is possible to send
the message RXM-PMREQ to the GNSS receiver [12324]
+ULOC behaviour improved to provide proper information in no network scenarios [13001]
Memory pool increased to improve the behaviour when there are multiple consecutive +ULOC calls
[13331]
3.2 LEON-G100-07S-01 new features and improvement
The new features and improvements below have been implemented (with respect to LEON-G100-07S).
3.2.1 New features
Embedded DTMF decoding capability has been implemented. LEON is able to detect incoming DTMF
tones, decode them and output the related DTMF code via the +UDTMFD AT command. LEON DTMF
decoding capability allows the device embedding a LEON module to be remotely managed via DTMF
tones without the need to add an external DTMF decoder chipset.
LEON can be instructed to remain camped on a specific BTS via the newly introduced +UCELLLOCK
command.
InBand modem implementation, including the new +CECALL command (equivalent to +UECALLTYPE) as
specified by 3GPP
3G SIM (USIM) support implementation
+CSQ reports BER even during GPRS data connection
+COPS and +CGED now provide network information without textual information, to allow parsing
with a basic CPU