SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETERS

28

OUTLINE DIMENSIONS - CA013-…B0

CA013-0303-**

CA013-0202-**

CA013 - XXXX - XX BO - XX

PART NUMBER ACTIVE CABLE

Series

0202 = CFP4

SPECIFICATIONS

Voltage Rating: 3.3 V

Power Consuption 2.9 W

Module temparature: 70 °C

Mating cycle

(Insetion/extraction): 50 times

Plug in Force: 80 N max.

Pull-out Force: 80 N max.

Differential impedance: 100 ohm

Data rate: 28 Gbps

MATERIALS AND FINISH

• Direct Attached Copper (DAC) Active Cable

• Supports 25-28 Gbps x 4ch for 100 Gbps interconnection

• Internal retimer Chip with CDR-IC

• Suitable for CEI28G-VSR compliance channel

• Compatible with plug-in CFP Multi Source Agreement (MSA) connector

• Supplied as complete cable assembly

• AWG26 support for lengths up to 7 m

• RoHS2011/65/EU

• REACH conform according to EU Regulation 1907/2006

Length of Cable

OUTLINE DIMENSIONS - CA013-…P0

CA013 - XXXX - XX PO - XX

PART NUMBER PASSIVE CABLE

0303 = CFP2

0102 = CFP4-QSFP28

26 = 26 AWG 28 = 28 AWG

Cable Length: 05 = 0.5 m, 10 = 1.0 m, 20 = 2.0 m,

SPECIFICATIONS

Voltage Rating: 3.3 V

Module temparature: 70 °C

Mating cycle

(Insetion/extraction): 50 times

Plug in Force: 80 N max.

Pull-out Force: 80 N max.

Differential impedance: 100 ohm

Data rate: 25 Gbps

MATERIALS AND FINISH

Cover: Zinc Alloy

FEATURES

• Supports 25-28 Gbps x 4 ch for 100 Gbps interconnection

• Supports 100 GBASE-CR4, 25 GBASE-CR, and EDR requirement

• Compatible with plug-in in CFP Multi Source Agreement (MSA) connector

• Supplied as complete cable assembly

• 0.5 m only available with AWG 28

• AWG28 recommend up to 2 m, AWG26 recommended for further length

• RoHS2011/65/EU

• REACH conform according to EU Regulation 1907/2006

Length of Cable

Length of Cable