Manual Switches PB Series
Pushbutton Switches
116Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
FEATURES
1 Compact size
1 Up to 4-poles
1 Sealed versions
TOUCH FEEDBACK SWITCHES
SHORT TRAVEL SWITCHES
PANEL SEALED SWITCHES
ORDER GUIDE
Momentary and alternate action switches.
No. of SPDT Circuits
224
Button Mom. Alt. Mom.
Color Action Action Action
Black 2PB11-T2 82PB19-T2 —
2PB732-T2 — 4PB714-T2
(M8805/23-001) (M8805/23-003)
Red 2PB12-T2 — —
2PB717-T2 — —
(M8805/23-002)
Green 2PB273-T2 — —
ORDER GUIDE
Momentary action switches.
Button No. of SPDT Circuits
Color 2 3
Black 2PB7 3PB7
These switches resemble the touch-feed-
back design, but have a flexible leaf ac-
tuator for lower operating force and short-
er button travel.
An elastomer seal is bonded between ac-
tuating plunger and button collar. An O-
ring seals the button assembly to the pan-
el front.
Two-piece design enables button to be
mounted separately. After switch unit is
wired, it snaps into place from behind
panel.
ORDER GUIDE
Momentary action switches.
No. of SPDT CircuitsButton Collar
Color Type 12
Black Hex 1PB4 2PB4
Black Round 1PB42 —
Red Round 1PB43 —
ELECTRICAL RATINGS
(Except 15PB and 700PB)
30 VDC: 5 amps, res., sea level or 50,000
ft.; 3 amps, ind., sea level; 2.5 amps
ind., 50,000 ft; 24 amps, max. inrush.
UL and CSA rating for basic switches: 5
amps, 125 or 250 VAC.
Manual Switches PB Series
Pushbutton Switches
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada117
WATERTIGHT SWITCH ORDER GUIDE
Momentary action switches.
Has knurled chrome-finished facenut.
Button No. of SPDT Circuits
Color 2
Black 2PB901-T2
Facenut-to-panel, button-to-facenut, and
bushing-to-facenut, sealing helps pre-
vent entry of water from behind panel, up
and over bushing wall. Switch units pot-
ted in corrosion resistant metal enclo-
sure. Meets submergence requirements
of MIL-STD-108 (up to 10 PSI water pres-
sure for one hour).
HERMETICALLY SEALED
SWITCHES
These pushbuttons are equipped with
HM hermetically sealed switch units,
which have metal-to-metal fusion around
the cover, actuator base, and mounting
holes. Terminals are sealed glass-to-
metal.
Vapor-proof construction enables use in
damp locations without condensation on
contacts. External parts corrosion resist-
ant per MIL-S-8805. Meets explosion-
proof requirements of MIL-S-8805.
ORDER GUIDE
Momentary action switches.
No. of SPDT Circuits
24
Button
Color
Black 702PB1 704PB1
MINIATURE SIZE SWITCHES
1PB5 15PB2
ORDER GUIDE
Momentary action switches.
No. of SPDT Circuits
Button 12
Steel* 1PB5 —
White Plastic — 15PB2
* Steel button enables use under hinged plates or paddle levers, in addition to manual operation.
ELECTRICAL RATINGS — 700PB
and 15PB
700PB (With hermetically sealed switch
units):
28 VDC and 115 VAC, 400 HZ: 3 amps,
ind., 5 amps, res.
15PB:
30 VDC and 115 VAC: 2 amps, ind., 5
amps. res.; 1.0 amp, lamp load.
1PB5
250 VAC: 5 amps.
30 VDC: 5 amps, res., sea level or 50,000
ft.; 3 amps, ind., sea level; 2.5 amps ind.,
50,000 ft.; 24 amps, max. inrush.
Pushbuttons