www.panduit.com
PanZone
®
Wall Mount Cabinet
SPECIFICATION SHEET
applications
The PanZone
®
Wall Mount Cabinet is
a zone cabling solution for connecting up
to 96 users in applications where a
telecommunication room is not available
or when security is a concern. There are two
options for cable routing and management
inside the cabinet. The optional horizontal
slack manager can be installed between
an active network switch and patch panel to
manage the patch cords, which is especially
useful for high-density applications.
This method allows for improved airflow
and cooling of network equipment and is of
particular benefit for PoE applications. The
second option is to use traditional horizontal
cable managers located adjacent to the patch
panels to route the patch cords and any slack
should be bundled in the cabinet's vertical
channel. Optional rear equipment rails provide
additional support for network equipment up
to 17.5" deep, providing versatility for greater
range of applications.
technical information
Dimensions:
PZC12S, PZC12P, PZC12W:
25.8"H x 25.0"W x 22.85"D (656mm x 635mm x 581mm)
Standards:
Accepts 19" EIA rack mount panels and equipment
Performance:
Working load rating 250 lbs.
Packaging:
Cabinet, locks, two adjustable #12-24 threaded rails, assembly hardware
and rear cable routing accessory kit
key features and benefits
Structurally
engineered design
Allows cabinet to swing freely for easy operation even
under maximum load capacity
Horizontal slack
manager (available)
Improves cable routing by enabling front accessible moves,
adds, and changes; increases airflow through the cabinet
because patch cords are no longer in the vertical channel
blocking side ventilation
Thermal
management system
Optimizes airflow for improved heat dissipation from
various switches and power supplies
Fan kit
(available)
Provides additional ventilation for multiple switches or PoE
enabled devices; use in cabinets with a solid or windowed door
Adjustable equipment
rails (1" increments)
Increases usable cabinet depth by accommodating various
equipment including 1 RU or 2 RU PoE switches up to 17.5" deep
Rack spaces
identification
Allows for quick and easy location of rack spaces speeding
installation of horizontal rack mount products
Grounding kit
(available)
Complies with TIA/EIA grounding and bonding specifications
specifications
Hinged wall mount cabinet shall be constructed from steel and
capable of managing 12 rack units of active and passive networking
equipment plus two additional rack units for power strips and small
electronic devices, such as modems, routers, etc. The cabinet shall
have hinged doors on front and back for complete access to
networking equipment. Cabinet shall allow use of standard length
patch cords and have capabilities for managing all patch cord slack
without blocking ventilation openings or vertical pathways. Cabinet
shall be engineered to allow proper climate control for use with
various networking equipment including Power over Ethernet
(PoE) switches and Uninterrupted Power Supplies (UPS).
PanZone
®
Wall Mount Cabinets
Solid door: PZC12S
Perforated door: PZC12P
Window door: PZC12W
PanZone
®
Cable Management
Options
Horizontal
slack manager: PZCHSM2
Cable bend radius
post, 4": PZBR4
Cable bend radius
post, 3.5": PZBR3.5
Cable bend radius
post, 3": PZBR3
Strain relief bracket,
2" offset: SRB19BLY
PanZone
®
Accessories
Fan kit, 51 cfm:
PZCFK
Fan filter
replacement: PZCFR
Grounding kit: PZCGK
Rear equipment
rails kit, #12-24 PZCRR
threaded:
PanZone
®
Solid UTP Patch Cords**
Cat 6A SD, plenum,
plug-plug, blue: UXPPBU*
Cat 6, plenum,
plug-plug, blue: UPPBU*
PanZone
®
Solid STP Patch Cords**
Cat 6A, plenum,
plug-plug, blue: SAPPBU*
Power Strips 19" Horizontal
15 A: CMRPSH15
20 A: CMRPSH20
Mini-Com
®
Ultimate ID
®
Modular
Patch Panels
24-port: UICMPP24BLY
48-port: UICMPP48BLY
* Zone cords are available in 10 to 100 ft lengths
in 5 ft increments. And 100 to 150 ft lengths in
10 ft increments.
** Plug to Plug versions are listed. Jack to Plug
and Jack to Jack options are also available
©2016 Panduit Corp.
ALL RIGHTS RESERVED.
ZCSP13--WW-ENG
Replaces WW-ZCSP02
12/16/16
Dimensions are in inches (Dimensions in parentheses are metric)
PanZone
®
Wall Mount Cabinet
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
PANDUIT CANADA
Markham, Ontario
cs-cdn@panduit.com
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
cs-emea@panduit.com
Phone: 44.20.8601.7200
PANDUIT JAPAN
Tokyo, Japan
cs-japan@panduit.com
Phone: 81.3.6863.6000
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
cs-ap@panduit.com
Phone: 65.6305.7575
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
cs-aus@panduit.com
Phone: 61.3.9794.9020
PANDUIT LATIN AMERICA
Guadalajara, Mexico
cs-la@panduit.com
Phone: 52.33.3777.6000
Contact Customer Service by email: cs@panduit.com
or by phone: 800.777.3300
Visit us at www.panduit.com
For more information
Dimensions are in inches [Dimensions in brackets are metric]
PZC12W - Wall Mount Cabinet with windowed door
PZCHSM2
Horizontal Slack
Manager, 2 RU
PZBR4
4" Bend Radius
Post Kit
PZCRR
Rear Equipment
Rail Kit
PZCFK
Fan Kit
PanZone
®
Wall Mount Cabinet Cable Management Options and Accessories
PZC12S – Wall Mount Cabinet
with solid door
22.85
(581)
25.0
(635)
25.8
(656)
PZC12P – Wall Mount Cabinet
with perforated door
22.85
(581)
25.0
(635)
25.8
(656)
22.85
(581)
25.0
(635)
25.8
(656)