ODIN-W2 series
Using u-blox connectivity software
Application Note
Abstract
This document provides an overview of ODIN-W2 series
and
describes how the u-blox connectivity
software can be configured
for Wi-Fi and Bluetooth
®
dual mode use cases.
www.u
-blox.com
UBX
-16024251 - R03
ODIN-W2 series - Application Note
UBX-16024251 - R03 Contents
Page 2 of 40
Document information
Title ODIN-W2 series
Subtitle Using u-blox connectivity software
Document type Application Note
Document number UBX-16024251
Revision and date R03 26-Jan-2018
Disclosure restriction
This document applies to the following products:
Product name Type number Software version PCN reference
Product status
ODIN-W260 ODIN-W260-04B-00 5.0.0
5.0.1
N/A Mass Production
ODIN-W262 ODIN-W262-04B-00 5.0.0
5.0.1
N/A Mass Production
u-blox reserves all rights to this document and the information contained herein. Products, names, logos and designs described herein may in
whole or in part be subject to intellectual property rights. Reproduction, use, modification or disclosure to third parties of this document or
any part thereof without the express permission of u-blox is strictly prohibited.
The information contained herein is provided “as is” and u-blox assumes no liability for the use of the information. No warranty, either
express or implied, is given, including but not limited, with respect to the accuracy, correctness, reliability and fitness for a particular purpose
of the information. This document may be revised by u-blox at any time. For most recent documents, visit www.u-blox.com.
Copyright © 2018, u-blox AG.
u-blox is a registered trademark of u-blox Holding AG in the EU and other countries. Arm is the registered trademark of Arm Limited in the
EU and other countries.