General
The IB 100 interface box is an interface box for creating a
connection between Sencom Smart Sensor and a PC running
the SPS24 calibration and maintenance software.The interface
box supports the off-line calibration feature SENCOM is known
for. By the offline calibration option with SENCOM it offers
flexibility and increases process uptime.
A WU11 SENCOM cable connects the sensor to the interface
box using a screw terminal. The IB100 box is being connected
to a common PC running SPS 24 software through Bluetooth
connection.
The SPS24 PC software offers convenient operation using the
larger display than the analyzer.
The software features:
• Sensor management
• Database viewer and
• Error message displayoptions
The analyzer displays a multi-layered menu in abbreviated form,
while the SPS24 can display the full text and supplementary
information, enabling smooth operation and reducing operation
hours.
Working with the data management function and other
applications in the PC, the SPS24 can save a large amount of
calibration data, and allow editing and outputting of reports.
By referring to past data, the SPS24 can automatically estimate
the health of the sensor, and thus display the anticipated
replacement date.
Features
Convenient and quick connection
Bluetooth connectivity offers smooth and operation friendly
connection for efficient performance of sensor maintenance tasks
Easy-to-use interface
The SPS24 displays sufficient information and makes operation
more efficient thanks to the ease of use and flexible display area
of the PC.
Trend graphics to show input stabilization
The trend wave form displayed during calibration allows
operators to visually recognize when the input becomes stable.
Data management for SENCOM sensors
The SPS24 can maintain previous data of sensors as well as the
data of currently connected sensors. With this feature, operators
can:
• check past calibration records as well as the latest one
• record and manage calibration work for each operator under
the valid user account
• limit access by setting user levels
Migration of sensor data
The setting data of the current sensors can be saved in the PC.
Flexible reporting function
Properties of the sensors which are saved in the PC can be
output in PDF or Excel formats. The output parameters are
selectable.
Model IB100 interface box with
SPS24 SENCOM PC software
General
Specifications
GS 12B06J09-01E-E
1st Edition
GS 12B06J09-01E-E
Specification of Interface Box
This includes an interface box with bluetooth, a CD with driver
and SPS24 software.
Operating Condition
Operating Temperature : -10°C to 50°C
Operating Humidity : 10% to 85% RH
Installation Altitude : 2000m or less
Installation location : Indoors
Storage Condition
Storage Temperature : -30°C to 70°C
Power Supply
Battery : LR6 (AA Alkaline) or HR6 (AA Nickel-
metal hydride) ×2 (not included)
Power consumption : 200mW (excl. sensor power supply)
Cont. operation time : 8H
Enclosure
Material : ABS
Degree of protection
(IEC 60529) : IP54 (rating applies when the Cable
Assy is conn.)
Connector type : M9 5pin female
Bluetooth Communication
Compliant standard : Bluetooth Ver 2.1+EDR, product is
listed under declaration ID D032445
Supported profile : SPP (Serial Port Profile)
Carrier frequency band : 2402 to 2480 MHz
Channel spacing : 1 MHz
Number of channels : 79
Comm. distance : 10m (Class2)
Serial communication
Protocol : MODBUS RTU
Physical Layer : RS485 Half duplex (2 wire)
Baud rate : 9600bps
Configuration
Connector
connection
WU11 SENCOM cable
(for digital communications)
<On site>
FU20F SENCOM sensor
(single unit can be connected)
FLXA202/FLXA21 2-wire liquid analyzer
(with the SENCOM module)
The SENCOM sensor can save its properties such as calibration data in itself.
The sensor is detachable and calibrated either at the site or the laboratory.
Example: the calibration data saved on the PC can be used in both the PC and FLEXA.
<At laboratory>
Windows PC*
SPS24
SENCOM
PC Software
WU11 SENCOM cable
(for digital communications)
IB100 Interface box
SENCOM sensor (up to four units)