Sure-Lites

TD505041EN

2017 10-10

Catalog #

Type

Date

Project

Comments

Prepared by

A real workhorse in emergency lighting systems. These durable, reliable

units are unparalleled in both performance and freedom from

maintenance. The HR Series provide a low cost, solid-state lighting

system ideal for industrial, commercial or multi-housing environments.

High capacity makes the HR Series ideal for installations where a large

number of heads/exits will be remotely operated.

SPECIFICATION FEATURES

Electronic

- Dual Voltage Input 120/277 VAC,

60 Hz

- Line-latching

- Solid-State Voltage

Limited Charger

- Solid-state Switching

- Low-Voltage Disconnect

- Brownout Circuit

- Overload/Short Circuit Protection

- Test Switch/Power Indicator

Light

- Isolation Transformer

Housing Construction

- 18-Gauge Die-Formed

Steel Housing

- 18-Gauge Die-Formed Steel Cover

- Knockout, Conduit or Cord Set

- Universal J-Box

Mounting Pattern

- Keyhole Mounting Slots

- White Finish

Battery

- Sealed Lead Calcium,

Recombination

- Maintenance-free, Long-life

- Full Recharge Time, 24 hrs. (max.)

- Polarized Battery Terminals

Code Compliance

- UL 924 Listed

- Life Safety NFPA 101

- NEC/OSHA

- Most State and Local Codes

Warranty

- Unit: 1-year

- Battery: 5-year pro-rata

Head/Lamp Data

- Two Heads Standard

- Top Mounted

- Glare-Free Lens

- Fully Adjustable

- Remote Capability

- High Impact - Thermoplastic

- Matches Housing Finish

Head/Lamp Data

- Mount only on a vertical plane

(i.e. wall mount, etc.)

HR SERIES

DESCRIPTION

High Capacity Ultra High Capacity

A 12 1/4” (311mm) 17” (432mm)

B 13 1/4” (337mm) 16 7/8” (429mm)

C 7 7/8” (200mm) 11 1/2” (292mm)

D 4 1/4” (108mm) 8” (203 mm)

E 4 3/4” (121mm) 6” (152mm)

F 1 3/8” (35mm) 2” (51mm)

G --------------------- 5 3/4” (146mm)

H --------------------- 2 1/2” (64mm)

ULTRA HIGH CAPACITY

HIGH CAPACITY

270-360 WATTS

(ULTRA-HIGH CAPACITY)

87-117 WATTS

(HIGH CAPACITY)

12-VOLT

SEALED LEAD CALCIUM

BATTERY

EMERGENCY LIGHTING

ENERGY DATA

HR12117

Input Current (Max.):

120V= .26A

277V= .13A

HR12117347

Input Current (Max.):

120V= .25A

347V= .60A

HR12170

Input Current (Max.):

120V= 1.08A

277V= .45A

HR12360

Input Current (Max.):

120V= 1.17A

277V= .54A

ORDERING INFORMATION

Series Options¹

‚

² Accessories³

Cord Set Mounting Kit Protective Housing

HR12117 347 = 347V CSK120 = Cord

Set (120 VAC)

2MSWH = Mounting Shelf

(High Capacity)

WG3 = Wire Guard (Ultra High

Capacity)

HR121360 MH = Metal

Heads

CSK277 = Cord

Set (277 VAC)

3BRWH = Mounting

Brackets

VS2 = Polycarbonate Vandal

Shield

A = Ammeter 3MSWH = Mounting Shelf

(Ultra-High Capacity)

VK1 = Voltmeter

V = Voltmeter WG7 = Wire Guard (High

Capacity)

TDM = Time

Delay Monitor

VS2WP = Weatherproof

Polycarbonate Vandal Shield

Notes: 1. Add as a sufﬁx.

2. 0,1,3, and 4 Heads also available. Specify after catalog number (i.e., HR-12117379).

3. Order separately.

DIMENSIONS

ELECTRICAL RATINGS

Rated Wattage to 87 1/2% of rated D.C. Voltage Lamp Information

Series Battery DC

Voltage

1 1/2

hours

Type Wattage Number

HR12117* SLC 12 11 7 87 58 43 Incandescent 9 29-86

HR12117347

SLC 12 11 7 87 — — Incandescent 9 29-86

HR12360* SLC 12 360 270 180 135 Incandescent 9 29-86

*Batteries may be shipped separately. SLC = Sealed Lead Calcium

Specifications and

dimensions subject to

change without notice.

Eaton

1121 Highway 74 South

Peachtree City, GA 30269

P: 770-486-4800

www.eaton.com/lighting

HR SERIES

PHOTOMETRICS

TECHNICAL DATA

Heads

The lamp housing is constructed of ﬂame-

resistant and impact-resistant injection molded

thermoplastic with matching ﬁnish. The

three dimensional swivel assembly permits

approximate aiming adjustment from 80°

vertical and 358° rotation. The placement is

secured with a lockable pivot mounted on a

rotating base ring.

Lamps

Designed speciﬁcally for emergency lighting

applications, the PAR 36 sealed beam type

design insures optimum glare-free trapezoidal

light distibution along with horizontal and

vertical adjustment by rotating the lens within

the housing.

Housing

The rugged 18-gauge die-formed steel housing

is ﬁnished with an attractive white corrosion-

resistant polyester powder coat paint. Cabinet

has keyhole mounting slots, universal mounting

pattern, and knockouts in rear and side for AC/

DC wiring connections and accessory cord set.

Up to three lighting heads can be mounted on

the cabinet.

Line-Latched

Sure-Lites' line-latched electronic circuitry

makes installation easy and economical. A

labor efﬁcient AC-activated load switch prevents

the lamps from turning on during installation

to a non-energized AC circuit. Line-latching

eliminates the need for a contractor's return

to a job site to connect the batteries when the

building's main power is permanently turned

on.

Solid-State Charger

Supplied with a 120 through 277 VAC, voltage

regulated solid-state charger. Immediately

upon restoration of AC current after a power

failure, the charger provides a high charge

rate. The charge circuit reacts to the condition

of the battery and alters the rate of charge in

order to maintain peak battery capacity and

maximize battery life. Solid-state construction

recharges the battery following a power failure

in accordance with UL 924.

Overload and Short Circuit Protection

The solid-state overload monitoring device in

the DC circuit disconnects the lamp load from

the battery should excessive wattage demands

be made and automatically resets when the

overload or short circuit is removed. This

overload current protective feature eliminates

the need for fuses or circuit breakers for the DC

load.

Brownout Circuit

The brownout circuit in Sure-Lites' units

monitors the ﬂow of AC current to the unit and

activates the emergency lighting system when

a predetermined reduction of AC power occurs.

This dip in voltage will cause most ballasted

ﬁxtures to extinguish causing loss of normal

lighting even though a total power failure has

not occurred.

Solid-State Transfer

The unit incorporates a solid-state switching

transistor which eliminates corrode and pitted

contacts or mechanical failures associated

with relays. The switching circuit is designed to

detect a loss of AC voltage and automatically

energizes the lamps. Upon restoration of the

AC power, the emergency lamps will switch off

and the charger will automatically recharge the

battery.

Low-Voltage Disconnect

When the battey's terminal voltage falls below

80% of the rated voltage, the low-voltage

circuitry disconnects the lighting load. The

disconnect remains in effect until normal utility

power is restored, preventing deep battery

discharge.

Test Switch/Power Indicator Light

Conveniently located Test Switch allows for

manual veriﬁcation of proper operation of

the transfer circuit and emergency lamps. The

Power Indicator Light provides visual assurance

that the AC power is on.

Sealed Nickel Cadmium Battery

The fully sealed, long-life, maintenance-free

lead calcium battery is ideal for emergency

lighting applications. These recombinant cycle

batteries typically provide eight to ten years of

life and may be operate in any position.

Warranty

All Sure-Lites' units are backed by a ﬁrm one-

year warranty against defects in material and

workmanship (excluding lamps). Maintenance-

free, long-life, sealed lead calcium batteries

carry a ﬁve-year pro-rata warranty.

FEET

LEFT

FEET

RIGHT

0 10 20 30 40 50 60

FEET FROM LAMP (Measured on axis)

LAMP

AXIS

1FC 0.5 0.3 0.2 0.1

LAMP

AXIS

FEET

LEFT

FEET

RIGHT

0 10 20 30 40 50 60

FEET FROM LAMP (Measured on axis)

1FC 0.5 0.3 0.2 0.1

Hor

i zontal Dis tri buti o n

Vertical Distribution

Lamp No. 29-86

Initial Lumens

–

29-86 @ 138

Lamp No. 29-86