Doc. No.
TS-A0162-42`
Page No.
1/10
Date Issued
2015-04-06
Prepared by
Josephine
XKB Connectivity
Date revised
2018-11-23
checked by
Jay
Product Specification
Rev. No.
01
Approved by
Mei Chen
Title：TACT SWITCHES 轻触开关
1. SCOPE（适用范围）
This specification covers the performance, tests and quality requirements for the single key switches
which have no key top(TACT SWITCHES:MECHANICAL
CONTACT)本规范涵盖了盖单推柄和无推柄的轻触开关的性能、测试和质量要求。 XKB
Connectivity)
2. PRODUCT DESCRIPTION（ 产品描述）
XKB-DESCRIPTION（描述）
Part Number（料号）
轻触开关6x6x4.5贴片 100gf
TS-1102S-A-B-B
3. APPLICABLE DOCUMENT （适用文件）
The following documents form a part of this specification to the extent specified herein. In the event of
conflict between the requirements of this specification and the product drawing, the product drawing
shall take precedence. In the event of conflict between the requirements of this specification and the
referenced documents, this specification shall take
precedence.（下列文件构成本规范的一部分，在此规定的范围内。本规范要求与产品图纸有冲突
时，以产品图纸为准。如果本规范的要求与参考文件发生冲突，应以本规范为准。）
MIL-STD-105
EIA-364
QQ-N-290
ISO/IEC- 7816
4. REQUIREMENTS （要求）
4.1. Design and Structure （设计和结构）
Product shall be of the design, structure and physical dimensions specified on the applicable product drawing.（ XKB
Connectivity产品的设计、结构和物理尺寸参考所适用的产品图纸）
参考附件图档
4.2. Materials/ Finish (材料/表面处理)
Doc. No.
TS-A0162-42`
Page No.
2/10
Date Issued
2015-04-06
Prepared by
Josephine
XKB Connectivity
Date revised
2018-11-23
checked by
Jay
Product Specification
Rev. No.
01
Approved by
Mei Chen
Title：TACT SWITCHES 轻触开关
Materials used in the structure of product shall be as specified on the applicable product drawing.
(产品结构中使用的材料参考所适用的产品图纸)
4.3. Ratings （额定功率）
Item（项目）
Standard（标准）
Rated Voltage (Maximum)额定电压
12V
Rated Current (Maximum)额定电流
50mA
DC
Operating temperature range工作温度范围
-20℃～+70℃
From -20 to +70℃ degree centigrade
Storage Temperature Range储存温��范围
-40℃～+85℃
From -40 to +85 degree centigrade
5.0 TEST STANDARD （测试条件）
Unless otherwise specified, the standard range of atmospheric conditions for making
measurements and tests are as follows （除另有说明外，用以进行测量和测试的标准环境
条件范围如下）
5.1 Ambient temperature（环境温度）: 5℃ to 35℃
5.2 Normal humidity （正常湿度）: 45% to 85%
5.3 Air pressure （气压）: 86Kpa to 106Kpa
5.4 Temperature （温度）：40±2℃
5.5 Relative humidity （相对湿度）：65±5%
6.0 TYPE OF ACTUATION 动作类型
Tactile feedback （轻触返回）
7.0 CONTACT ARRANGEMENT 1POLES 1THROWS （接触形式1 接点 1 回路）
Details of contact arrangement are given in the assembly drawings.
（详细接点形式见装配图）
8.0 PERFORMANCE AND TEST DESCRIPTION （ XKB Connectivity性能和测试类型）
8.1 APPEARANCE （外观）
ITEM
DESCRIPTION（类型）
TEST CONDITION（测试条件）
REQUIREMENT（要求）