2.92 mm 2.4 mm 1.85 mm
Delta RF
Test Cables
Color Coded
Low Loss
Phase Stable
978-927-1060
|
sales@deltarf.com
|
deltarf.com
978-927-1060
|
sales@deltarf.com
|
deltarf.com
2
Delta RF Cables
Color Coded, Low Loss, Phase Stable
Table of Contents
Critical Interface Dimensions and RF Test Data
RF Connector critical interface dimensions meet the requirements of Mil-STD 348, latest revision, IEC
61169-32 (1.85 mm), 61169-40 (2.4 MM), 61169-35 (2.92 MM) as applicable.
Delta's Precision Test Cables are tested 100% for VSWR and Insertion Loss up to the maximum operating
frequency for each series. VSWR and Insertion Loss plots are provided with each precision test cable.
True vertical integration across the manufacturing process
Delta’s vertically integrated global manufacturing facilities offer customers across a broad range of
industries in-house design and simulation, manufacturing and assembly, and in-process inspection and
testing to deliver custom RF solutions. With our wide range of capabilities and a team of experienced
engineers and technicians, we deliver the highest level of quality by the most efficient, cost-effective, and
flexible means available.
Low Loss, Phase Stable Test Cables - 18 GHz Part Number Page #
N Plug to N Plug, 18 GHz, Precision Test Cables PT18-NMNM-XXX 3
Low Loss, Phase Stable Test Cables - 26.5 GHz Part Number Page #
SMA Plug to SMA Plug, 26.5 GHz, Precision Test Cables PT26.5-SMSM-XXX 4
Low Loss, Phase Stable Test Cables - 40.0 GHz Part Number Page #
2.92 MM to 2.92 MM, 40 GHz, Precision Test Cables PT40-KMKM-XXX 5
Low Loss, Phase Stable Test Cables - 50.0 GHz Part Number Page #
2.4 MM to 2.4 MM, 50 GHz, Precision Test Cables PT50-24M24M-XXX 6
Low Loss, Phase Stable Test Cables - 67.0 GHz Part Number Page #
1.85 MM to 1.85 MM, 67 GHz, Precision Test Cables PT67-185M185M-XXX 7
3
978-927-1060
|
sales@deltarf.com
|
deltarf.com
Low Loss, Phase Stable Test Cables – 18 GHz
Precision Test Cables
N Plug to N Plug – 18 GHz
1127000K001-900
1134000K001-900
1128000K001-701
2227000K001-810
2225000K301-700
2226000K721-900
Adapters
Within Series N
Adapters
Between
Series N to
SMA Adapters
Electrical – Cable Assembly Specifications N Connector Specifications
Frequency Range DC to 18 GHz Body Material Corrosion Resistant Steel
Impedance
50 Ohms Body Plating Passivated
VSWR @ 18 GHz 1.25:1 Max. Contact Material Brass
Insertion Loss See Table Below Contact Plating Au Plate
Amplitude Stability +/- 0.05 dB Insulator Material PTFE
Phase Stability +/- 5° Coupling Nut Material Corrosion Resistant Steel
DWV@Sea Level 500 Vrms Coupling Nut Plating Passivated
Insulation Resistance 5000 MΩ Backshell Material Aluminum
VoP 74% Backshell Plating Anodized
Shielding Effectiveness < -90 dB Gasket Material Silicone Rubber
Coupling Nut Torque 12-15 In. Lbs.
Mechanical – Cable Assembly Specifications
DXB 360 RF Cable Specifications
Static Bend Radius
1.29" (33 mm) Center Conductor Silver Plated Copper
Dynamic Bend radius
2.56" (65 mm) Dielectric LD PTFE
Weight
34 G / Meter Shield Silver Plated Copper Ribbon
Crush Resistance
1500 N / mm 2 Interlayer PTFE
Durability
500 Cycles Minimum Outer Conductor Silver Plated Copper
Environmental - Cable Assembly Specifications
Outer Jacket FEP (Blue)
Temperature Range -55 to +125 C Armor Jacket
Abrasion Resistant PTFE
Braided Jacket
Insertion Loss Performance Insertion Loss Performance
Delta Part Number Length @18.0 GHz Delta Part Number Length @18.0 GHz
PT18-NMNM-036 36.0" -2.33 dB PT18-NMNM-079 79.0" -4.42 dB
PT18-NMNM-048 48.0" -2.91 dB PT18-NMNM-098 98.0" -5.35 dB
PT18-NMNM-060 60.0" -3.50 dB PT18-NMNM-118 118.0" -6.32 dB
PT18-NMNM-072 72.0" -4.08 dB PT18-NMNM-120 120.0" -6.42 dB