Statement: The information contained in this data sheet is intended to assist you in the design of Futureway materials. It is not intended to and does not create
any explicit or implicit guaranties, including any guaranty of marketability of the goods and for special purposes. It is also not guaranteed that users can achieve
the results shown in the technical specifications of this material in specific applications. They will change with different application situations, such as
equipment type, environmental conditions, process conditions, etc. Users should determine the suitability of Futureway materials for each application.
Tel:+86-755-23079685 Fax:+86-755-28093217 Web:www.szfutureway.com E-mail:sales@szfutureway.com
DEDICATED TO BECOMING THE MATERIALS EXPERT FOR CUSTOMERS.
- 1 -
Technical Data Sheet
FUTUREWAY
®
CC-40
Soft Silicone Foam For Pouch Cells
FUTUREWAY
®
CC-40 is a new silicone foam developed by Futureway in
combination with the technical requirements of pouch cells foam.
Excellent anti-aging ability, wide compressible range, high elastic
retention ability of multiple compression, excellent flame retardant
properties are incomparable with other foam. This product design fully
combines the new energy industry specifications and application
requirements, providing longer charging and discharging life and higher
security for battery packs.
Features & Benefits
Long-term mechanical properties retention after compression, especially in
cold and hot environment
The mechanical properties attenuation is very low after repeated compression,
which fully guarantee the safety of charging and discharging of the pouch cells
Anti-ultraviolet radiation, ozone resistance, extreme temperature resistance and
flame resistance make materials stable in complex environments
Meet UL 94 industrial fire prevention requirement, provide adequate protection
for battery pack safety
Apply to GB 38031-2020 Electric vehicles traction battery safety requirements
Typical Applications
Pouch cell cushion
Services
Available with a pressure sensitive-adhesive on one or two sides
Provide cutting, splicing and other processing services
Use
For PSA options, surfaces must be clean and free of oil, grease, moisture, dust and
dirt. Isopropyl alcohol is good for cleaning the surface.
Statement: The information contained in this data sheet is intended to assist you in the design of Futureway materials. It is not intended to and does not create
any explicit or implicit guaranties, including any guaranty of marketability of the goods and for special purposes. It is also not guaranteed that users can achieve
the results shown in the technical specifications of this material in specific applications. They will change with different application situations, such as
equipment type, environmental conditions, process conditions, etc. Users should determine the suitability of Futureway materials for each application.
Tel:+86-755-23079685 Fax:+86-755-28093217 Web:www.szfutureway.com E-mail:sales@szfutureway.com
DEDICATED TO BECOMING THE MATERIALS EXPERT FOR CUSTOMERS.
- 2 -
Typical Properties
Property
Unit
Typical Value
Physical
Color
-
Black
Thickness
mm
1.5-4.0
Density
kg/m
3
300
Tensile Strength
kPa
220
Elongation
%
68
Compression Force Deflection
kPa
Size:50mm(L)*50mm(W)
*2mm(T)
Speed:2mm/min
10%
27
40%
103
Compression Set
%
0.5
Flammability
Flame Resistance
-
V-0
Electrical & Thermal
Dielectric Strength
kV/mm
3.5
Thermal Conductivity
W/(m·K)
0.05
Temperature Range
˚C
-55 to +200
Notes:
*Typical value is based on historical data. Please note the frequency of testing varies.
**Additional industry specifications are also available. All other properties are based on industry standard
guidelines.
Standard Thickness Tolerances
Slit Material and Tape (PSA) Width Tolerances
Nominal Thickness (mm)
Tolerance (mm)
Nominal Width (mm)
Tolerance (mm)
1.5, 2.0, 2.5, 3.0
± 0.3
W ≤ 20
± 1.0
3.5, 4.0
± 0.4
20 < W ≤ 40
± 1.5
40 < W ≤ 100
± 2.0
100 < W ≤ 450
± 5.0