Statement: The information contained in this data sheet is intended to assist you in the design of Futureway materials. It is not intended to and does not create
any explicit or implicit guaranties, including any guaranty of marketability of the goods and for special purposes. It is also not guaranteed that users can achieve
the results shown in the technical specifications of this material in specific applications. They will change with different application situations, such as
equipment type, environmental conditions, process conditions, etc. Users should determine the suitability of Futureway materials for each application.
Tel:+86-755-23079685 Fax:+86-755-28093217 Web:www.szfutureway.com E-mail:sales@szfutureway.com
DEDICATED TO BECOMING THE MATERIAL EXPERT FOR CUSTOMERS
- 1 -
Technical Data Sheet
FUTUREWAY
®
CM-90
Extra Firm Silicone Sponge for Prismatic Cells
FUTUREWAY
®
CM-90 is a new type of silicone sponge material
developed by Futureway which combines the characteristics of prismatic
power cells to solve the elastic buffer. It has excellent resistance to
environmental aging, wide compressibility range and multiple
compression. The high elastic retention ability and excellent flame
retardant properties are unmatched by other elastomer materials. This
product design is fully integrated with the new energy industry
specifications and application requirements, providing a longer charge
and discharge life and higher security for the battery pack.
Features & Benefits
Long-term mechanical performance retention after compression, especially in
alpine and hot summer environments
UV, ozone and extreme temperature resistance make the material more stable
in complex environments
Meet the stringent UL 94 V-0 flame retardant requirements and provide
adequate protection for battery pack safety
Apply to GB 38031-2020 Electric vehicles traction battery safety requirements
The CTP structure design suitable for prismatic cell module-less PACK
provides better elastomer selection for automatic assembly of PACK, system
energy density increase and cost reduction
Typical Applications
Prismatic cell cushion
Services
Available with a pressure sensitive-adhesive on one or two sides
Provide cutting, splicing and other processing services
Use
For PSA options, surfaces must be clean and free of oil, grease, moisture, dust and
dirt. Isopropyl alcohol is good for cleaning the surface.
Statement: The information contained in this data sheet is intended to assist you in the design of Futureway materials. It is not intended to and does not create
any explicit or implicit guaranties, including any guaranty of marketability of the goods and for special purposes. It is also not guaranteed that users can achieve
the results shown in the technical specifications of this material in specific applications. They will change with different application situations, such as
equipment type, environmental conditions, process conditions, etc. Users should determine the suitability of Futureway materials for each application.
Tel:+86-755-23079685 Fax:+86-755-28093217 Web:www.szfutureway.com E-mail:sales@szfutureway.com
DEDICATED TO BECOMING THE MATERIAL EXPERT FOR CUSTOMERS
- 2 -
Typical Properties
Property
Unit
Typical Value
Physical
Color
-
Gray
Surface Finish
-
Double Smooth
Thickness
mm
0.4-4.0
Hardness
Shore A
52±5
Density
g/cm
3
1.3
Tensile Strength
MPa
3.0
Elongation
%
120
Shear Strength
MPa
1.2
Compression Force Deflection
MPa
ASTM D1056
10%
0.4
20%
0.9
30%
1.6
40%
3.0
Tear Strength
kN/m
3.8
Water Absorption
%
< 5
Flammability
Flame Resistance
-
V-0 (T ≥ 2 mm)
Electrical & Thermal
Dielectric Strength
kV/mm
3.5
Thermal Conductivity
W/(m·K)
0.15
Temperature Range
˚C
-55 to +200
Notes:
*Typical value is based on historical data. Please note the frequency of testing varies.
**Additional industry specifications are also available. All other properties are based on industry standard
guidelines.