Statement: The information contained in this data sheet is intended to assist you in the design of Futureway materials. It is not intended to and does not create
any explicit or implicit guaranties, including any guaranty of marketability of the goods and for special purposes. It is also not guaranteed that users can achieve
the results shown in the technical specifications of this material in specific applications. They will change with different application situations, such as
equipment type, environmental conditions, process conditions, etc. Users should determine the suitability of Futureway materials for each application.
Tel:+86-755-23079685 Fax:+86-755-28093217 Web:www.szfutureway.com E-mail:sales@szfutureway.com
DEDICATED TO BECOMING THE MATERIALS EXPERT FOR CUSTOMERS.
- 1 -
Preliminary TDS
Technical Data Sheet
FUTUREWAY
®
TIX-30
Fireproof Insulation Sheet
FUTUREWAY
®
TIX-30 is an ultra-high strength fireproof insulation
material composed of special fire-resistant organic silicon and
fire-resistant fabric. TIX-30 has strong fire resistance and can resist flame
ablation up to 1300℃, avoiding the spread of flames to other areas. At the
same time, TIX-30 can maintain structural integrity in high temperatures
or flames, and has excellent electrical insulation. In addition, TIX-30 has
excellent flexibility and is convenient for processing and installation.
These unique features enable materials to address a range of safety and
design issues in electric vehicles.
Features & Benefits
High mechanical strength
Excellent fire resistance
Excellent electrical insulation at high temperatures
Ultra-thin thickness and excellent flexibility
Typical Applications
Electrical insulation sheet at high temperatures for module bar
Electrical insulation sheet at high temperatures for box girder
Electrical insulation sheet at high temperatures for cell side
Electrical insulation sheet at high temperatures for module side panel
Electrical insulation sheet at high temperatures for module output pole
Electrical insulation sheet at high temperatures for copper bar/aluminum bar
Services
Available with a pressure sensitive-adhesive on one or two sides
Provide cutting, splicing and other processing services
Use
For PSA options, surfaces must be clean and free of oil, grease, moisture, dust and
dirt. Isopropyl alcohol is good for cleaning the surface.
Statement: The information contained in this data sheet is intended to assist you in the design of Futureway materials. It is not intended to and does not create
any explicit or implicit guaranties, including any guaranty of marketability of the goods and for special purposes. It is also not guaranteed that users can achieve
the results shown in the technical specifications of this material in specific applications. They will change with different application situations, such as
equipment type, environmental conditions, process conditions, etc. Users should determine the suitability of Futureway materials for each application.
Tel:+86-755-23079685 Fax:+86-755-28093217 Web:www.szfutureway.com E-mail:sales@szfutureway.com
DEDICATED TO BECOMING THE MATERIALS EXPERT FOR CUSTOMERS.
- 2 -
Typical Properties
Property
Unit
Test Method
Typical Value
Physical
Color
-
Visual
Gray
Gray
Thickness
mm
ASTM D374
0.2
0.3
Density
g/cm
3
ASTM D1056
1.60
1.57
Tensile Strength
MPa
ASTM D412
106
94
Tear Strength
kN/m
ASTM D624 (DIE C)
256
215
Flammability
Flame Resistance
-
UL94
VTM-0/V-0
VTM-0/V-0
Electrical & Thermal
Dielectric Strength
kV/mm
ASTM D149
35
33
Volume Resistivity
Ohm·cm
ASTM D257
10.3×10
15
10.6×10
15
Electrical Resistance At Elevated
Temperature (800℃ @ 10min)
Ohm
IEC 60345
2.6×10
7
1.2×10
7
Fire Resistance (1300˚C @ 10 min)
-
-
Pass
Pass
Thermal Conductivity
W/(m·K)
ASTM C518
0.13
0.13
Temperature Range
˚C
SAE J2236
-55 to +200
-55 to +200
Notes:
*Typical value is based on historical data. Please note the frequency of testing varies.
**Additional industry specifications are also available. All other properties are based on industry standard
guidelines.
Usable Life & Storage
10 years after the date of manufacture when stored in original packaging at
temperatures up to 35˚C and 70% relative humidity(see applicable data sheets for
pressure-sensitive adhesive option).
Packaging Information
Continuous length wide coil material. Length varies with thickness.
Special thickness and roll sizes also available.