Size ΦD L W H C R P Vmax
4*5.4 4.0 5.4±0.3 4.3 4.3 5.1 0.5~0.8 1.0 0.3
5*5.4 5.0 5.4±0.3 5.3 5.3 5.9 0.5~0.8 1.5 0.3
6.3*5.4 6.3 5.4±0.3 6.6 6.6 7.2 0.5~0.8 2.1 0.3
6.3*7.7 6.3 7.7±0.3 6.6 6.6 7.2 0.5~0.8 2.1 0.3
8*10 8.0 10±0.5 8.3 8.3 9.0 0.7~1.1 3.2 0.3
10*10 10.0 10±0.5 10.3 10.3 11.0 0.7~1.3 4.5 0.3
10*12.5 10.0 12.5±0.5 10.3 10.3 11.0 0.7~1.3 4.5 0.3
12.5*13.5 12.5 13.5±0.5 13.0 13.0 13.7 1.1~1.4 4.5 0.4
16*16.5 16.0 16.5±0.5 17.0 17.0 18.0 1.4~1.8 6.4 0.4
16*21.5 16.0 21.5±0.5 17.0 17.0 18.0 1.4~1.8 6.4 0.4
Electric Characteristics:
Cap. Cap. Rate Surge Oper.
Nominal Leakage D.F. R.C IMP Load
(uF) Tol. Volt. Volt. Temp.
Case Size Current
MAX
100KHz 100KHz Life
P/N
(%)
(V-DC) (V-DC)
(℃)
D*L(mm) Max (uA)
(%)
(mA rms)
at 25℃(Ω)Max
(hours )
1000 ±20 25 28.8 105 16*16.5 250 16 1800 0.035 5000
1000 ±20 35 40.3 105 16*16.5 350 14 1800 0.035 5000
REMARKS:
1. Leakage Current Test:
6.3V ~100V at 20℃ for 2 minutes ;
2. Operating temperature:
6.3V~100V -55℃~ +105℃ ;
3. .Dissipation Factor Test:
at 20℃, 120 Hz.
4. Capactitance Test:
at 20℃, 120 Hz.
5. Ripple Current Test:
at 105℃, 100K Hz ;
6. Load Life:
Capacitance Change: Within ±30% of initial value;
tanδ: 300% or less of initial specified value;
Leakage Current: Initial specified value or less;
7. Shelf Life:
The following specifications shall be satisfied when the capacitors are restored to 20℃ after
exposing them for 1000 hours 105℃ without voltage applide. Before the measurement,
the capacitor shall be preconditioned by applying voltage according to them 4.1 of JIS C5101-4.
Capacitance Change: Within ±30% of initial value;
tanδ: 300% or less of initial specified value;
Leakage Current: Initial specified value or less;
8. when have characteristic requested: Load life & shelf life test and etc. , judgment standard reference to our catalogue.
9.Remarks: Su'scon Part Number with suffix code "A" is specially offered for automotive project,
which meets AEC-Q200 standard.
●SPECIFICATION
Leakage Current
洩漏電流
Dissipation Factor
Measurement Frequency:120Hz. Temperature:20℃
散逸因素（損失角）
Rate Voltage(V) 6.3 10 16 25 35 50 63 80 100
(tan δ)
tan δ （MAX)
0.30 0.26 0.22 0.16 0.14 0.14 0.08 0.08 0.07
Low Temperature Stability Measurement Frequency:120Hz.
低溫特性
Rate Voltage(V) 6.3 10 16 25 35 50 63 80 100
Impedance Ratio(MAX)
Z(-25℃)/Z(20℃）
4 3 2 2 2 2 2 2 2
阻抗比率(MAX) Z(-55℃)/Z(20℃）
8 5 4 3 3 3 3 3 3
●Frequency Coefficient of Permissible Ripple Current
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Production date:2022.11.16
DONG GUAN KUAN KUN ELECTRONIC CO., LTD
YIN HE INDUSTRIAL ZONE, QING XI TOWN, TEL: +86-769- 87318000
DONG GUAN CITY, GUAN DONG CHINA (P.R.O.C) FAX: +86-769- 87318008
FOR APPROVAL
Customer:
Electrolytic Capacitors
Su
,
scon
世强先进
CDL Series
Code
世强先进
1.00
33 ~ 150
0.40
0.85
0.92
1.00
≦ 33
0.35
0.70
0.90
After 2 minutes application of rated voltage,leakage current is not more than 0.01cv or 3(uA),whichever is greater.
120 ≦ F ＜ 1K
1K ≦ F ＜ 10K
10K ≦ F ＜ 100K
100K ≦ F
5000 hours, with application of rated voltage at 105℃.
>150
0.60
0.85
0.95
1.00
DIMENSIONS(mm)
▇ Chip Type
Polarity Marking(
(Cathode)
Series code
Capacitance
Voltage
CDL
1940
470
63V
Month Code
Polarity Marking(
(Cathode)
DLO
100
35V
Series code
Month code
Capacitance
Voltage
Fig.1 ΦD=4~10mm
Fig.2 ΦD≧12.5mm
Frequency (Hz)
Capacitance (μF)