• Extremely low ionic and NVR Levels.

• Proprietary tip forming and washing processes minimize particle release during cleaning.

• Low tribocharge, less than 5 volts dry.

• Manufactured in an ISO 5 & ISO 13485 cleanroom.

• Static dissipative handle to prevent electrostatic discharge and tribocharging against gloves.

Advantages

Description

ESD Performance

Cleanliness

1800 Series Electrostatic Discharge Safe Swabs

Wilshire Contamination Control Division

Foamtec International

720 Venture Dr.

Waco, TX 76712

Foamtec International WCC Division

1-760-599-7160

www.foamtecintlwcc.com | customerservice@foamtecintlwcc.com

is a registered trademark of Foamtec International.

1800 Series Electrostatic Discharge Safe Swabs are designed to protect ESD sensitive

assemblies during cleaning. CleanWIPE®, a super-soft, open-cell foam is thermally

shaped and sealed around a static dissipative handle to create a precision cleaning tool.

The handle is inherently static dissipative, non-blooming and free of carbon particulates.

1800 series swabs are solvent resistant and are ideal for cleaning of lubricants, epoxy,

solder ball and solder ﬂux residues from devices and circuit boards. 1800 series swabs

are widely used in the circuit board assembly, aerospace, medical electronics, optics,

semiconductor and disk drive industries.

All swabs are double-bagged to aid clean room entry procedures.

We reserve the right to correct any errors that may occur within this datasheet.

CleanWIPE

ESD Safe Swabs

Handle Surface Resistivity

Dissipation: ± 1000 volts to 10 volts in less than 1 second at 50% RH

Particles

25k per tip @ .5μm

TNVR's (mg/swab)

In DI Water In IPA

0.15

0.40

Ionics (μg/tip)

Chloride Sulfate Total Anions

≤ 0.90 ≤ 0.40 ≤ 1.30

FTIR (ng/tip)

Silicone Amide DOP

1.30 Not Detected Not Detected

Part No. HT1801 HT1802 HT1829 HT1832 HT1839 HT1846 HT1850 HT1851 HT1852

Image

Head Material CleanWIPE

Reticulated Polyurethane Foam

Head Thickness 5.5 3.2 2.9 3.6 3.3 3.2 2.6 3.2 3.3

Head Width 6.0 4.1 3.8 3.6 3.4 3.2 2.6 3.2 3.3

Head Length 18.0 10.5 10.0 11.0 9.1 20.5 10.5 10.5 10.1

Handle Material Polypropylene With Permanent ESD Additive

Handle Diameter 2.9 2.5 2.5 2.5 3.0 2.5 2.5 2.5 3.0

Handle Length 132.5 58.5 58.7 57.5 79.6 50.9 58.4 59.3 77.0

Total Swab

Length

150.5 68.5 68.7 68.5 88.7 71.4 68.9 69.8 87.2

Head Bond Thermal

Handle Color White

Description

Flexible,

Oval

Semi-

Flexible

Bulb

Flexible

Paddle

Rigid,

Round

Semi-

Flexible

Paddle

Rigid Spear

Tip

Flexible,

Spear

Pointed

Rigid,

Spear

Pointed

Semi-

Flexible

Spear

Swab Models |

Measured in Millimeters. ± 0.02

Packaging Conﬁgurations

Wilshire Contamination Control Division

Foamtec International

720 Venture Dr.

Waco, TX 76712

Foamtec International WCC Division

1-760-599-7160

www.foamtecintlwcc.com | customerservice@foamtecintlwcc.com

is a registered trademark of Foamtec International.

We reserve the right to correct any errors that may occur within this datasheet.

Part No. Units/Bag Bags/Case Units/Case

HT1801-500 500 Swabs/Bag 16 Bags/Case 8,000 Swabs

HT1802-500 500 Swabs/Bag 25 Bags/Case 12,500 Swabs

HT1829-500 500 Swabs/Bag 25 Bags/Case 12,500 Swabs

HT1832-500 500 Swabs/Bag 25 Bags/Case 12,500 Swabs

HT1839-500 500 Swabs/Bag 25 Bags/Case 12,500 Swabs

HT1846-500 500 Swabs/Bag 25 Bags/Case 12,500 Swabs

HT1850-500 500 Swabs/Bag 25 Bags/Case 12,500 Swabs

HT1851-500 500 Swabs/Bag 25 Bags/Case 12,500 Swabs

HT1852-500 500 Swabs/Bag 25 Bags/Case 12,500 Swabs