The distributing rack MDR/300 is designed for use in larger net-
work nodes equipped with a high number of active network
components. Its low mounting depth and the possibility of flexi-
bly forming rows via lateral and rear extensions ensure an opti-
mum configuration in line with customer requirements and its
integration into existing customer environments.
The distribution rack complies with the housing system stan-
dards (19“ or ETSI).
Advantages
■ Mounting depth of 300 mm complies with requirements of
modern network nodes both in the telecommunications and
in the in-house network areas
■ Possibility of forming rows via lateral and rear extensions and
a high packing density in combination with flexible cable rou-
ting ensure an optimum handling
■ Configurable and easily extendable patch cord management
system which grows with your needs
■ Modular system for optimum configuration according to
customer requirements, from open distribution racks to fully-
fledged cabinet systems with various locking options
Splice module (Lightbox 2HU)
Splice module (Variobox 1HU)
Patch module (Jumperbox)
Splice module (Swivel Box 1HU)
HDR/192 - BGT 19”/3HU
Transverse connection panels
■ Standardized system technology (19“ or ETSI)
The MDR can accommodate other network components:
■ splice modules ■ patch modules
■ transverse connection panels
Design ETS rack equipment practice according to IEC
60917-2-1 and IEC 60917-2-2 for accepting sys-
tem components according to 19“ or ETSI stan-
dards, open or closed (depending on configuration)
Dimensions WHD 600/900/1200 x 2200 x 300 mm
Weight about 120kg/233 kg (depending on configura-
tion and equipment)
Materials sectional steels as well as sheet steel of diffe-
rent thickness
Surface powder-coated similar to RAL 7035
sheet steel of different sizes, zinc plated,
blue chromatized
For a complete overview of Network Systems visit our website at
www.foc-fo.com.
Network Systems Distribution Rack