Specification
Input
Voltage range 85-264VAC 120-373VDC
AC current 1.5A/115VAC 0.7A/230VAC
Frequency range 47-63Hz
Inrush current (max) 45A/230VAC
Output
DC voltage
(
V) 24 27
Efficiency 86.00% 86.00%
Voltage ADJ range 22.5V
~
26V 25V
~
28.5V
Rated current(A) 2.71 2.41
Rated power (W) 65W 65W
Ripple & noise(max )note2
100
Voltage tolerance
note3
±2%
Line regulation
noite4
±1%
Load regulation
note5
±2%
Setup, rise time 500ms 30ms/230VAC 1200ms 30ms/115VAC(at full load)
Hold up time 50ms/230VAC 10ms/115VAC(at full load)
Status indicator Green LED
Protection
Over load
110%-150% of the rated output power
Protection mode
:
Hiccup mode
,
recover automatically after fault condition is removed
Over voltage (V)
30V
~
34V
Protection mode
:
Hiccup mode
,
recover automatically after fault condition is removed
Safety and EMC
Withstand voltage I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
Insulation resistance I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25
℃
/70
﹪
RH
Safety standard note 6 Design refer to EN IEC 62368-1
、
GB4943.1
EMC emission
Parameter Standard Test level
Conducted EN 55032 设计参考Class A
Radiated EN 55032 设计参考Class A
Voltage Flicker EN 61000-3-3 设计参考Class A
Harmonic Current EN IEC 61000-3-2 设计参考Class A
EMC immunity
Parameter Standard Test level
ESD EN 61000-4-2 Level 3 8KV air
Radiated Susceptibility EN 61000-4-3 Level 2 3V/m
EFT/Burest EN 61000-4-4 Level 3 2KV
Surge EN 61000-4-5
Level 3 2KV/Line-Line;Level3 4kV/Line-Line-FG
Conducted EN 61000-4-6 Level 2 3V
Magnetic Field EN 61000-4-8 Level 2 3A/m
Voltage Dips and interruptions EN 61000-4-11
<5% residual voltage for 0.5 cycles ,70% residual voltage for 25
cycles ,<5% residual voltage for 250 cycles: