MGR060-□F/FR Series

▲ Features

Universal AC input/full range

Protections:short circuit/overload/over voltage

Cooling by free air convection

Can be installed on DIN rail TS-35/7.5 or 15

Built in DC OK active signal

LED indicator for power on

No load power consumption<0.75W

100% full load burn -in test

3 years warranty

▲ Model Encoding

MGR

060

Model name

Output wattage

Output voltage

Input voltage rating

With DC/OK function

MGR060-□F/FR Series

Specifications

Input

Voltage range 85-264VAC 120-370VDC

AC current 1.8A/115VAC 1A/230VAC

Frequency range 47-63Hz

Inrush current (max) Cold start：30A/115VAC 60A/230VAC

Output

DC voltage (V) 5V 12V 24V 48V

Efficiency 78% 86% 88% 88%

Rated Current (A) 10A 5A 2.5A 1.25A

Rated power(W) 50W 60W 60W 60W

Voltage ADJ.range 5-6V 12-15V 24-30V 48-56V

Ripple & noise(max ) Note.2 80mVp-p 120mVp-p 150mVp-p 200mVp-p

Voltage tolerange Note.3 ±2% ±1% ±1% ±1%

Line regulation ±1% ±1% ±1% ±1%

Load regulation ±1.5% ±1% ±1% ±1%

Setup，rise time Note.4 500ms 30ms/230VAC 500ms 30ms/115VAC(at full load)

Hold up time 50ms/230VAC 20ms/115VAC(at full load)

Status indicator Green LED

Protection

Overload

105%-150% rated output power

Protection type: Constant current limiting, recovers automatically after fault condition is removed.

Over voltage(V)

6.25-7.25V 15.6-18V 31.2-36V 57.6-64.8V

Protection type:Shut down O/P voltage ,re-power on to recover.

DC OK signal Relay contact rating(max.):30V/1A resistive

Safety and EMC

Withstand voltage I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC

Isolation resistance I/P-O/P,I/P-FG,O/P-FG :100M Ohms/500VDC/25℃/70﹪RH

Safety standards Design reference EN IEC 62368-1、GB 4943.1

EMC emission

Parameter Standard Test Level/Note

Conducted EN 55032 Class B

Radiated EN 55032 Class B

Voltage Flicker EN 61000-3-3 Design reference Class A

Harmonic Current EN IEC 61000-3-2 Design reference Class A

EMC immunity

Parameter Standard Test Level/Note

ESD EN 61000-4-2 Level 3 8KV air

Radiated Susceptibility EN 61000-4-3 Level 2 3V/m

EFT/Burest EN 61000-4-4 Level 2 1KV/5KHZ

Surge EN 61000-4-5 Level 2 1KV/L-N;Level2 2KV/L-N-FG

Conducted EN 61000-4-6 Level 2 3V

Magnetic Field EN 61000-4-8 Level 2 3A/m

Voltage Dips and interruptions EN 61000-4-11

＜5％ residual voltage for 0.5 cycles ,70％ residual voltage

for 25

cycles ,＜5％ residual voltage for 250 cycles:

Environmental

Working temperature - 20～+70 ℃ （Refer to "Derating curve "）

Storage temperature ﹣40～+85℃

Storage humidity 10-95﹪RH

Vibration Component:10-500Hz,2G 10 min/1cycle ,60 min each along X,Y,Z axes

MGR060-□F/FR Series