JOINT TECH ELECTRONIC INDUSTRIAL CO., LTD.
JOY DAY INDUSTRIAL CO., LTD.
PRODUCT SPECIFICATION
PRODUCT SERIES NAME: A1009 SERIES-DUAL ROW LOCK TYPE
PAGE: 1/4
1.SCOPE:
This specification covers the requirements for product performance of 1.00mm pitch wire to board
connector series.
2.CONSTRUCTION、DIMENSIONS 、 MATERIAL & PLATING:
See the attached drawings
3.RATINGS & APPLICABLE WIRES:
Item Standard
Rated Voltage (max.)
50V AC, DC
Rated Current (max.)
AWG #28
1A AC, DC
Insulation O.D.
and Applicable Wires
AWG #30
1A AC, DC 0.80mm (max.)
AWG #32
0.5A AC, DC
Ambient Temperature Range -25°C ~ +85°C*
*: Including terminal temperature rise
4.PERFORMANCE:
4-1.ELECTRICAL PERFORMANCE
Test Description Procedure Requirement
4-1-1 Contact
Mate connectors, measure by dry circuit, 20mV max.,
20mΩ max.
Resistance
10mA. (Based upon JIS C5402 5.4)
4-1-2 Insulation
Mate connectors, apply 500V DC between adjacent
Resistance
terminal or ground. (Based upon JIS C5402 5.2/
100MΩ min.
MIL-STD-202 Method 302 Cond. B)
4-1-3 Dielectric
Mate connectors, apply 500V AC (rms) for 1 minute
Withstandin
between adjacent terminal or ground. (Based upon No Breakdown
Voltage
JIS C5402 5.1/MIL-STD-202 Method 301)
4-1-4 Contact
Crimp the applicable wire on to the terminal, measure
5mΩ max.
Resistance
by dry circuit, 20mV max., 10mA.
on Crimped
Portion
APPROVED CHECKED
WRITTEN
BY BY
BY
董正一 童冠銘 周傑亮
A1
REVISE
2011.06.21
A0
NEW RELEASE
2008.11.25
REV.
DESCRIPTION
DATE
DOCUMENT NO: PS-1009-002