OBIS LX/LS Heat Sink
Heat Sink with Fan for
Thermal Management
OBIS LX and OBIS LS laser products come with a variety of accessories
to support your application needs.
As with all OBIS LX and OBIS LS lasers, the laser itself oers a stand-
alone all-in-one laser solution. The OBIS laser comes with a Power
Connection, USB Connection, Fan Connection and a SDR-type
Connection for laser control I/O. All of these are located on the
back panel of the OBIS LX/LS laser.
To simplify integration, Coherent oers a separate OBIS LX/LS Heat
Sink with an integrated fan. The Heat Sink oers a convenient way
to raise the laser beam height o the table and provide thermal
management. The fan simply plugs into the back of the OBIS LX or
OBIS LS laser to receive 12V DC power from the OBIS LX or OBIS LS
laser.
FEATURES
• Small footprint
• Rugged design
• Precision dowel pin laser positioning
• Convenient 69 mm (2.7 inch)
beam height
• Integrated cooling fan with
vibration isolation
• Output beam centered on standard
table bolt pattern
• Universal mounting to imperial or
metric bolt pattern
• Proven stable performance over
time and temperature
• Fan power connector plugs directly
to OBIS Laser Head
• Laser can be mounted on top for
vertical polarization or side for
horizontal polarization
OBIS LX/LS Heat Sink Datasheet
OBIS LX/LS Heat Sink (part # 1193289)
Top and Side Mount Plug Holes
Allow for Heat Sink to be mounted in either direction. Need horizontal polarization – mount the Heat Sink with the laser on the side.
Optional: Mount Heat Sink on its
side for special applications that
may require horizontal polarization
Connector 2 Pos
Vendor: Molex
Vendor Part: 51021-0200
Remove Plastic
Hole Plugs to Install
Screws (provided) to
Mount onto Table
Top Mount
Plug Holes
Side Mount
Plug Holes
Top Mounted
Side Mounted