WWW.SIGLENT.COM 1
SDS7404A H12
SDS7304A H12
Product Overview
SIGLENT’s SDS7000A series Digital Storage Oscilloscopes
are available in bandwidths of 4 GHz and 3 GHz, have 12-bit
ADCs with sample rate up to 20 GSa/s, maximum record length
of 1Gpts/ch, and display up to 4 analog channels + 16 digital
channels for high performance mixed signal analysis.
The SDS7000A series employs Siglent’s SPO technology
with a maximum waveform capture rate of up to 1,000,000
wfm/ s, 256-level intensity grading display function plus a color
temperature display mode. It also employs an innovative digital
trigger system with high sensitivity and low jitter. The trigger
system supports multiple powerful triggering modes including
serial bus triggering. Tools such as History waveform
recording, Search and Navigate functions, Signal Scan, Mask
Test, Bode Plot, Power Analysis, Eye/Jitter Analysis and
Compliance Test allow for extended waveform records to be
captured, stored, and analyzed. An impressive array of
measurement and math capabilities, options for a 50 MHz
arbitrary waveform generator, as well as serial decoding are
also features of the SDS7000A .
The large 15.6’’ HD display capacitive touch screen supports
multi-touch gestures, with the addition of user-friendly UI
design, can greatly improve the operational efficiency. It also
supports mouse control, and remote web control over LAN.
Key Features
4 analog channels, up to 4 GHz bandwidth with up to
20GSa/s sample rate
12-bit ADC
Low background noise: 220 μVrms @ 4 GHz bandwidth
SPO technology
Waveform capture rates up to 1,000,000 wfm/s
Supports 256-level intensity grading and color
temperature display modes
500 Mpts/ch standard, 1 Gpts/ch optional
Digital trigger system
Intelligent trigger: Edge, Slope, Pulse, Window, Runt,
Interval, Dropout, Pattern, Qualified, Nth edge,
Setup/hold, Delay and Video (HDTV supported). Zone
Trigger simplifies advanced triggering
Serial bus triggering and decoder, supports protocols I
2
C,
SPI, UART, CAN, LIN, CAN FD, FlexRay, I
2
S, MIL-STD-
1553B, SENT, Manchester, ARINC429 and USB 2.0
Segmented acquisition (Sequence) mode, dividing the
maximum record length into multiple segments (up to
124,000), according to trigger conditions set by the user,
with a very small dead time between segments to capture
the qualifying event
History waveform record (History) function, the maximum
recorded waveform length is 124,000 frames
Automatic measurements on 50+ parameters, supports
statistics with histogram, track, trend, Gating
measurement, and measurements on Math, History and
Memory traces
4 Math traces (32 Mpts FFT, Filter, addition, subtraction,
multiplication, division, integration, differential, square
root, etc.), supports formula editor
Abundant data analysis functions such as Search,
Navigate, SignalScan, Digital Voltmeter, Counter,
Waveform Histogram, Bode plot, Power Analysis,
Eye/Jitter Analysis and Compliance Test
High Speed hardware-based Average, Hi-Res; High
Speed hardware-based Mask Test function, with Mask
Editor tool for creating user-defined masks
16 digital channels (optional)
Built-in 50 MHz waveform generator
Large 15.6” HD TFT-LCD display with 1920 * 1080
resolution; Capacitive touch screen supports multi-touch
gestures
Interfaces include: 4x USB Host 3.1 Gen 1，2x USB 3.0
Host，USB 2.0 Device，2x 1000M LAN，DVI-D，DP 1.2，
HDMI 1.4，Audio, External Triger In, Aux Out (Pass/Fail,
Trigger Out), 10 MHz In，10 MHz Out
Built-in web server supports remote control over the LAN
port using a web browser. Supports SCPI remote control
commands. Supports external mouse and keyboard