ORPC-851-C-V-G-(JD)
Shenzhen Orient Components Co ., Ltd
Copyright© 2019 Orient .All rights Reserved
V1
1
ORIENT
Photo coupler
Product Data Sheet
SHENZHEN ORIENT COMPONENTS CO ., LTD
Block A 3rd Floor No.4 Building,Tian’an Cyber Park,Huangge Rd,LongGangDist,Shenzhen,GD
TEL
：
0755-29681816
FAX
：
0755-29681200
www.orient-opto.com
Part Number:
ORPC-851-C-V-G-(JD)
Customer:
Date:
ORPC-851-C-V-G-(JD)
Shenzhen Orient Components Co ., Ltd
Copyright© 2019 Orient .All rights Reserved
V1
2
1. Features
(1)
High collector- emitter voltage (V
CEO
= 350V)
(2)
Current transfer ratio(CTR: 50~600% at I
F
= 5mA, V
CE
= 5V)
(3)
High isolation voltage between input and output (V
iso
= 5000 Vrms)
(4)
Pb free and RoHS compliant.
(5)
In compliance with RoHS, REACH standards
(6)
MSL Class Ⅰ
(7)
Safety approval
UL approved (No.E323844)
VDE approved (No.40029733)
CQC approved (No.CQC09001029446 CQC13001086898)
CE approved (No.AC/0431008)
State Grid approved (No.SGCM013420170152 )
2. Description
(1)
The ORPC-851-C-V-G-(JD) series devices consist an infrared emitting diodes,
optically coupled to a photo transistor detector.
(2)
The devices are in a 4-pin DIP package and available in wide-lead spacing and SMD option.
3. Applications
•
Telephone line interface
•
Interface to power supply circuit
•
Controller for SSRs. DC motor
•
Programmable Controllers
4. Absolute Maximum Ratings at Ta=25℃
Parameter
Symbol
Rated Value
Unit
Input
Forward Current
I
F
60
mA
Peak forward current
(100μs pulse, 100Hz frequency)
I
FP
1
A
Reverse Voltage
V
R
6
V
Power dissipation
P
D
100
mW
Output
Collector and emitter Voltage
V
CEO
350
V
Emitter and collector Voltage
V
ECO
7
Collector Current
I
C
50
mA
Consume Power
P
C
150
mW
Total Power Dissipation
P
tot
200
mW
*1 Isolation Voltage
V
iso
5,000
Vrms
Operating Temperature
T
opr
-55 to + 100
℃
Storage Temperature
T
stg
-55 to + 125
*2 Soldering Temperature
T
sol
260
1.
AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1)
Short between anode and cathode on the primary side and between collector and emitter on
the secondary side.
(2)
The isolation voltage tester with zero-cross circuit shall be used.
(3)
The waveform of applied voltage shall be a sine wave.
2.
For 10 Seconds