Data sheet
Cable connector class F
A
Page 1/8
P/N
130863-02-E
EAN 4250184159247
2023/05/30
Version: AH
Illustrations
Dimensional drawing
See enlarged drawings at the end of document
Product specification
• cable connector for field assembly Class F
A
for 8 wire cables
• to connect / extend / repair / relocate copper data cables up to Cat.7
A
• compliance to Class F
A
up to 1000 MHz according to ISO/IEC 11801 in connection with Cat.7
A
copper cables *1
• suitable for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE)
• compact design: diameter 16.8 mm x length 64 mm
• IP67 protected housing in combination with IP67 appropriate cables *2
• refined zinc die-cast housing
• easy and fast assembly without special tools
• shield connection and strain relief integrated
• easy connection of data cables AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors
(IDC)
• conductor diameter up to 1.6 mm
• suitable for cables with an overall diameter of 5.0 to 9.7 mm *2
• fully shielded version according to DIN EN 50173-1
• suitable for applications in the railway industry according to data sheet
• *1 F
A
(with cable lengths of 20 m and above on the left and right side of the cable connector)
• *2 IPX7 (when combined with cables suitable for IP67 and a cable jacket diameter of 6.2 mm to 9.7 mm)
Data sheet
Cable connector class F
A
Page 2/8
P/N
130863-02-E
EAN 4250184159247
2023/05/30
Version: AH
Technical Data
General Data
Mechanical measurement according to MICE M1
Ingress measurement according to MICE I1
Climatic measurement according to MICE C1
Electromagnetic measurement according to MICE E2
Design cable connector
Shielding shielded
Transmission technology Copper
Color metallike
Dimensions
Dimension (L x W x H) 62 mm x 16.8 mm x 16.8 mm
Dimension (L x W x H) 2.441 in. x 0.661 in. x 0.661 in.
Weight 27 g
Weight 0.0595 lb
Field assembly ability yes
Transmission characteristics
Class (ISO/IEC) FA *1 (with cable lengths of 20 m and above on the left and right
side of the cable connector)
Remote Powering yes
PoE IEEE 802.3af
PoE plus IEEE 802.3at
UPoE yes
Transmission rate up to 10 GBit IEEE 802.3an
Connections/interfaces
Connector technology interface 1 IDC-connection
Connector technology interface 2 IDC-connection
Termination data, solid wire (min. - max.)
Conductor cross section, solid wire AWG 26/1 - AWG 22/1
Conductor cross section, solid wire 0.128 mm² - 0.324 mm²
Conductor diameter, solid wire (bare copper) 0.409 mm - 0.643 mm
Conductor diameter, solid wire (bare copper) 0.016 in. - 0.025 in.