3000W peak pulse power capability with a 10/1000µs waveform
Excelle nt clampin g capability
Fast response time
Low incremental surge resistance
Meets MSL level 1, per J-STD-020
High temperature soldering guaranteed at 260°C, 10sec
Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
IEC 61000-4-2 ESD 30kV (Air), 30kV (Contact)
ESD protection of data lines in accordance with IEC 61000-4-2
EFT protection of data lines in accordance with IEC 61000-4-4
Notes:
1. Non-repetitive current pulse, per Fig. 3 and derated above T
A
=25 °C per Fig. 2
2. Measured on 8.3ms single half sine-wave, or equivalent square wave,
duty cycle=4 pulses per minute maximum
3. Mounted on recommended pad layout
DO-214AB (SMC)
Features
3.0SMCJx Series
Transient Voltage Suppressors
Peak Pulse Power 3000W Stand-off Voltage 7V to 170V
Applications
For use in sensitive electronics protection against voltage transients induced by lightning or
inductive load switching. Key applications include protection of I/O interfaces, industrial and LED
lighting applications, DC power buses, and other vulnerable circuits used in consumer electronics.
Mechanical Data
Case: DO-214AB (SMC)
Molding compound meets UL 94 V-0 flammability rating
Terminals: Matte tin plated leads, solderable perJ-STD-002 and JESD22-B102
Marking: Cathode band on uni-directional devices only
Absolute Maximum Ratings (T
A
=25°C unless otherwise specified)
Symbol
P
PPM
I
PPM
I
FSM
P
D
V
F
R
θJA
T
J
T
STG
°C
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
2
Power Dissipation on Infinite Heatsink @ T
L
=75 °C (Fig. 6)
Maximum Instantaneous Forward Voltage @100A
2
Typical Thermal Resistance Junction to Ambient
3
250
6.0
3.5
100
A
W
V
°C/W
°C
Parameter Value Unit
Peak Pulse Power Dissipation with a 10/1000µs Waveform
1
(Fig. 3)
3000 W
Peak Power Pulse Current with a 10/1000µs Waveform
1
(Fig. 1)
See Next Table A
Junction Temperature Range -65 to +150
Storage Temperature Range -65 to +150