SAFETY DATA SHEET
1. Identification
Flexane 60L HardenerProduct identifier
Other means of identification
X0022
SKU#
Not available.
Recommended use
None known.
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
ITW Performance Polymers
Company name
35 Brownridge Rd
Address
Unit 1
Halton Hills, ON L7G 0C6
Customer Service
Contact person
978-777-1100
Telephone number
Fax
E-mail
800-424-9300
Emergency telephone
number
Not available.
Supplier
2. Hazard identification
Not classified.
Physical hazards
Category 2ASerious eye damage/eye irritation
Health hazards
Category 2Specific target organ toxicity following
repeated exposure
Not classified.
Environmental hazards
Label elements
Signal word
Warning
Hazard statement
Causes serious eye irritation. May cause damage to organs through prolonged or repeated
exposure.
Precautionary statement
Prevention
Do not breathe mist/vapours. Wash thoroughly after handling. Wear eye protection/face
protection.
Response
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Get medical advice/attention if you feel unwell. If eye irritation
persists: Get medical advice/attention.
Storage
Not available.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Supplemental information
20 % of the mixture consists of component(s) of unknown acute inhalation toxicity.
Other hazards
None known.
3. Composition/information on ingredients
Mixtures
1 / 7
Material name: Flexane 60L Hardener
X0022 Version #: 01 Issue date: 25-July-2023
SDS CANADA
CAS number %Chemical name Common name and synonyms
68479-98-1Diethyltoluenediamine 10-30%
Other components below reportable levels
1333-86-4Carbon Black 0.10-0.99%
All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.
4. First-aid measures
Move to fresh air. Call a physician if symptoms develop or persist.
Inhalation
Wash off with soap and water. Get medical attention if irritation develops and persists.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Eye contact
Rinse mouth. Get medical attention if symptoms occur.
Ingestion
Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred
vision. Prolonged exposure may cause chronic effects.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim under observation.
Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
If you feel unwell, seek medical advice (show the label where possible). Ensure that medical
personnel are aware of the material(s) involved, and take precautions to protect themselves.
General information
5. Fire-fighting measures
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Suitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
During fire, gases hazardous to health may be formed.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment
and precautions for firefighters
Move containers from fire area if you can do so without risk.
Fire fighting
equipment/instructions
Use standard firefighting procedures and consider the hazards of other involved materials.
Specific methods
No unusual fire or explosion hazards noted.
General fire hazards
6. Accidental release measures
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear
appropriate protective equipment and clothing during clean-up. Do not breathe mist/vapours. Do
not touch damaged containers or spilled material unless wearing appropriate protective clothing.
Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be
contained. For personal protection, see section 8 of the SDS.
Personal precautions,
protective equipment and
emergency procedures
Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is
possible. Absorb in vermiculite, dry sand or earth and place into containers. Following product
recovery, flush area with water.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to
remove residual contamination.
Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Methods and materials for
containment and cleaning up
Avoid discharge into drains, water courses or onto the ground.
Environmental precautions
7. Handling and storage
Do not breathe mist/vapours. Avoid contact with eyes. Avoid prolonged exposure. Provide
adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial
hygiene practices.
Precautions for safe handling
Store in tightly closed container. Store away from incompatible materials (see Section 10 of the
SDS).
Conditions for safe storage,
including any incompatibilities
2 / 7
Material name: Flexane 60L Hardener
X0022 Version #: 01 Issue date: 25-July-2023
SDS CANADA