SAFETY DATA SHEET
1. Identification
Flexane 60L ResinProduct identifier
Other means of identification
X0021
SKU#
Not available.
Recommended use
None known.
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
ITW Performance Polymers
Address
Shannon Industrial Estate
Bay 150
Company name
Telephone
Phone 363(61)771500
Emergency phone number
Emergency Number 44(0)1235 239 670
E-mail
customerservice.shannon@itwpp.com
Co, Clare, Ireland
2. Hazard(s) identification
Not classified.
Physical hazards
Category 4Acute toxicity, inhalation
Health hazards
Category 2Skin corrosion/irritation
Category 2ASerious eye damage/eye irritation
Category 1Sensitization, respiratory
Category 1Sensitization, skin
Category 3 respiratory tract irritationSpecific target organ toxicity, single exposure
Not classified.
Environmental hazards
Not classified.
OSHA defined hazards
Label elements
Signal word
Danger
Hazard statement
Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Harmful
if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause
respiratory irritation.
Precautionary statement
Prevention
Avoid breathing mist/vapors. Wash thoroughly after handling. Use only outdoors or in a
well-ventilated area. Contaminated work clothing must not be allowed out of the workplace. Wear
eye protection/face protection. Wear protective gloves. In case of inadequate ventilation wear
respiratory protection.
Response
If on skin: Wash with plenty of water. If inhaled: Remove person to fresh air and keep comfortable
for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing. Call a poison center/doctor if you feel unwell. If skin
irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical
advice/attention. If experiencing respiratory symptoms: Call a poison center/doctor. Take off
contaminated clothing and wash it before reuse.
Storage
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
1 / 8
Material name: Flexane 60L Resin
X0021 Version #: 01 Issue date: 07-25-2023
SDS US
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information
1.5% of the mixture consists of component(s) of unknown acute hazards to the aquatic
environment.
3. Composition/information on ingredients
Mixtures
CAS number %Chemical name Common name and synonyms
5124-30-14,4'-Methylenedicyclohexyl
diisocyanate
1-2%
Other components below reportable levels
301-10-0Stannous Octoate 0.10-0.99%
4. First-aid measures
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Oxygen or
artificial respiration if needed. Do not use mouth-to-mouth method if victim inhaled the substance.
Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other
proper respiratory medical device. If experiencing respiratory symptoms: Call a poison center or
doctor/physician.
Inhalation
Remove contaminated clothing immediately and wash skin with soap and water. In case of
eczema or other skin disorders: Seek medical attention and take along these instructions. Wash
contaminated clothing before reuse.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Eye contact
Rinse mouth. Get medical attention if symptoms occur.
Ingestion
Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred
vision. May cause respiratory irritation. Difficulty in breathing. Skin irritation. May cause redness
and pain. May cause an allergic skin reaction. Dermatitis. Rash.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim warm. Keep victim
under observation. Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
If you feel unwell, seek medical advice (show the label where possible). Ensure that medical
personnel are aware of the material(s) involved, and take precautions to protect themselves. Wash
contaminated clothing before reuse.
General information
5. Fire-fighting measures
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Suitable extinguishing media
Water. Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
During fire, gases hazardous to health may be formed.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment
and precautions for firefighters
Move containers from fire area if you can do so without risk.
Fire fighting
equipment/instructions
Use standard firefighting procedures and consider the hazards of other involved materials.
Specific methods
No unusual fire or explosion hazards noted.
General fire hazards
6. Accidental release measures
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear
appropriate protective equipment and clothing during clean-up. Avoid breathing mist/vapors. Do
not touch damaged containers or spilled material unless wearing appropriate protective clothing.
Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be
contained. For personal protection, see section 8 of the SDS.
Personal precautions,
protective equipment and
emergency procedures
2 / 8
Material name: Flexane 60L Resin
X0021 Version #: 01 Issue date: 07-25-2023
SDS US