Description
Conical Pt100 Sensor
The wetted parts of the sensor are in acid-proof stainless steel and the
supply wire in high-flexible, 4-wire silicone cable.
The conical sensor is ideal for measuring tem pe ra tu re in pipe systems
and tanks. The sensor mounting is hygienic and without gasket in a male
nipple part welded into the pipe or the tank wall. The nipple is available in
both flat and curved versions.
Hygienic, without gasket
Compact mounting
Fast response time
High accuracy
Wide temperature ran ge
Acid-proof, stainless steel
www.baumer.com
Design and specifications subject to change without notice
Installation Manual 11108816 00
Page 1
Sensor
Material Acid-proof stainless steel
AISI 316L (W 1.4404)
Time constant τ
0,5
< 1.0 sec.
Accuracy DIN/EN/IEC 60751
1/3 DIN B: ±0.1°C at 0°C
1/6 DIN B:
±0.05°C at 0°C
Pressure range < 25 bar (water flow 3 m/sec.)
Length 20 mm/25 mm
Cable
Type High-flexible silicone, grey
Wires 4 (2 x red, 2 x white)
Length 5 metres/10 metres
Technical Data
Environmental conditions
Humidity < 95% RH, condensing
Measuring range
-50...205°C
Ambient temperature
-50...205°C
Marking label
-30...105°C
Vibrations Lloyds Register, test 2
Protection class IP 65
Disposal of product and packing
According to national laws or by returning to Baumer
WARNING
This product contains no replaceable parts.
In case of malfunction the product must be shipped to Baumer for
repair.
Mounting Instructions
[mm]
V
ø16/ø50
Ar 10 Nm
Min. R50
Max. 25 bar
Max. 4 kg
Accessories
UK/2017-02-21 This installation manual may changed without notice
www.baumer.com
Design and specifications subject to change without notice
Type no. ZPW2-125
Type no. ZPW2-122
Welding nipple, male G1/8, R=1"
Welding nipple, male G1/8, flat, ø16mm
Blind plug
Type no. ZPX5-12
Installation Manual 11108816 00
Page 2
1/1 DIN B:
±0.3°C at 0°C