CERAMIC CAPACITORS
166
www.exxelia.com
Taping : dimensions
Page revised 06/21
FEATURES
• Low ESR/ESL, RF power capacitors
• NPO capacitors, ultra stability
• RoHS compliant
• Excellent characteristics in current, voltage and power
with high Q factor
• Working voltage: 200V - 7,200V
• Sizes: 2225, 4040 and 7065
• Capacitance range: 1pF - 10,000pF
• Laser Marked (optional)
APPLICATIONS
• RF Power Amplifi ers
• Industrial (Plasma Chamber)
• Medical (MRI Coils)
CIRCUIT APPLICATIONS
• DC Blocking
• Matching Networks
• Tuning and Coupling
PHYSICAL CHARACTERISTICS
• Chip capacitors for surface mounting with Nickel barrier
and tinning or Copper barrier and tinning (non magnetic)
• Ribbon leads for surface mounting, axial or radial leads
for through-hole circuits
ELECTRICAL AND ENVIRONMENTAL SPECIFICATIONS
Electrical specifi cations
Parameter Value
Capacitance 1pF - 10,000pF
Tolerances
B, C, D below 10pF
F, G, J, K, M above 10pF
Working voltage (WV
DC
) See capacitance range chart
Temperature coeffi cient NPO: (0 ± 30) ppm/°C, –55°C to +125°C
Insulation Resistance
10
5
MΩ min at 25°C at rated WV
DC
10
4
MΩ min at 125°C at rated WV
DC
Dielectric Withstanding
(test voltage applied for 5 seconds)
2 x WV
DC
for WV
DC
≤ 500V
1.5 x WV
DC
for 500V < WV
DC
≤ 2,500V
1.3 x WV
DC
for WV
DC
> 2,500V
Aging none
Piezo Eff ect none
Environmental specifi cations
Parameter Value
Life Test
2,000 hours, +125°C
at 1.5 x WV
DC
(WV
DC
≤ 500V)
at 1.3 x WV
DC
(500V < WV
DC
< 1,250V)
at 1 x WV
DC
(1,250V ≤ WV
DC
)
Moisture Resistance Test 1
240 hours, 85% relative humidity at 85°C
(ESA/SCC n°3009)
Moisture Resistance Test 2
56 days, 93% relative humidity at 40°C
0V, 5V, WV
DC
or 500V whichever is less
HOW TO ORDER
362 CL X 100 GC 1 - L - -RoHS
Voltage code Dielectric
Case
size
Capacitance
code
Tolerance
code
Termination
code
Lead / Ribbon code Coating code Marking code Tape and reel
201 = 200V
301 = 300V
501 = 500V
102 = 1,000V
122 = 1,200V
152 = 1,500V
162 = 1,600V
252 = 2,500V
362 = 3,600V
502 = 5,000V
702 = 7,000V
722 = 7,200V
Please refer to
voltage given in
capacitance range
chart
CL = NPO:
(0±30)
ppm/°C
X = 2225
E = 4040
F = 7065
Please refer
to capacitance
code given in
capacitance range
chart
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
See note 1
S = Standard:
tin-plated nickel
Available on sizes
2225 and 4040:
C = Non-magnetic:
tin-plated copper
Available on size
7065:
A = Non-magnetic:
silver-palladium
See note 2
-: no lead or ribbon
1 = Micro-strip ribbons,
RoHS
6 = Radial leads, non
RoHS
Available on size 4040:
1S = Short micro-strip
ribbons, RoHS.
2 = Axial ribbons,
RoHS.
3 = Radial ribbons,
RoHS.
Available on sizes
2225 and 4040:
7 = Axial leads, non
RoHS.
See note 3
-: no coating
H = coating
requested
-: no marking
L = laser marking
-: no tape and reel
Available on sizes
2225 and 4040:
E = horizontal orientation
CLX: 500 components per reel
CLE: 500 or 700 components
per reel
Available on size 4040:
X = verticale orientation,
only available on CLE, 350
components per reel
The RoHS tag is
not part of the
reference
Tag added at the
end of P/N for
information
CL Series High Power
Capacitance Breakdown voltage Vpeak (V)
12 pF >9500
47 pF 6000
47 pF TK239 8800
Typical Breakdown Voltage CLE with black coating 50 MHz DC = 1%
CERAMIC CAPACITORS
167
www.exxelia.com
General characteristics
RF CAPACITORS
Page revised 02/21
High Power CL Series
2225: TYPICAL ESR VERSUS CAPACITANCE
0
50
40
35
30
25
20
15
10
5
1 1,000
ESR (mΩ)
Capacitance (pF)
30 MHz
50 MHz
100 MHz
2225: TYPICAL CURRENT RATING VERSUS CAPACITANCE
1
10
100
1 10 100 1,000 10,000
I max RMS (A)
Capacitance (pF)
30 MHz
100 MHz
500 MHz
4040: TYPICAL ESR VERSUS CAPACITANCE
0
50
45
40
35
30
25
20
15
10
5
1 100 1,000
10,000
ESR (mΩ)
Capacitance (pF)
30 MHz
4040: TYPICAL CURRENT RATING VERSUS CAPACITANCE
2225: TYPICAL SERIES RESONANCE FREQUENCY VERSUS CAPACITANCE
100
1,000
10,000
1 10 100 1,000
Frequency (MHz)
Capacitance (pF)
1
10
100
1 1 0 100 1,000 10,000
I max RMS (A)
Capacitance (pF)
30 MHz
100 MHz
500 MHz
Note 1:
• For capacitance values less than 10pF, tolerances B, C and D available.
• For capacitance values equal to or higher than 10pF, tolerances F, G, J and K avail-
able.
Note 2:
• All terminations are backward compatible and lead-free
• The non-magnetic terminations are all Magnetism-free Rated
Note 3: when coding ribbons or leads for the description of the part, the termination has
to be mentioned for MR certified types to ensure that only non-magnetic materials are
used.
Note 4: Ribbon lead styles capacitors are not available in Tape and Reel.
Examples: 362 CLE 470 J1L any termination material could be used
362 CLE 470 JC1L only non-magnetic termination materials could be used
Please consult us for specific requirements.