Rev. 1.0
www.crea-tek.com
SMD0805H Series
Surface Mount PPTC Resettable Fuses 0805 size
Features
■
Surface Mount Devices
■
Standard 0805 mils footprint
■
Surface Mount packaging for automated assembly
■
Compatible with Pb and Pb-free solder reflow profiles
Electrical Specifications
Part No.
Vmax
Imax
Ihold
Itrip
Pd typ
Resistance
Mark
Current
Time
RMin
R1Max
V dc
A
A
A
W
A
sec
Ω
Ω
SMD080H075SF6V
6 50 0.75 1.50 1.2 8.00 1.00 0.020 0.160
C
SMD0805H100SF6V
6 50 1.00 2.00 1.2 8.00 1.00 0.018 0.110
1
SMD0805H110SF6V
6 50 1.10 2.20 1.2 8.00 1.00 0.018 0.110
2
SMD0805H150SF6V
6
50 1.50 3.00 1.2 8.00 1.00 0.011 0.065
3
SMD0805H175SF6V
6 50 1.75 3.50 1.2 8.00 2.00 0.010
0.060
4
SMD0805H190SF6V
6
50 1.90 3.80 1.2 8.00 5.00 0.006 0.055
5
SMD0805H200SF6V
6 50 2.00 4.00 1.2 10.0 2.00 0.006 0.055
F
SMD0805H260SF6V
6 50 2.60 5.20 1.2 13.0 2.00 0.003 0.035
K
SMD0805H260SF8V
8 50 2.60 5.20 1.2 8.00 5.00 0.006 0.035
K
SMD0805H260SF12V
12 50 2.60 5.20 1.2
8.00
5.00 0.006 0.035
K
SMD0805H300SF6V
6 50 3.00 6.00 1.2 15.0 2.00 0.003 0.030
L
SMD0805H350SF6V
6
50 3.50 7.00 1.2 17.5 2.00 0.003 0.030
N
SMD0805H380SF6V
6 50 3.80 8.00 1.2 20.0 2.00 0.002 0.028
O
SMD0805H400SF6V
6
50 4.00 9.00 1.2 20.0 2.00 0.002 0.026
P
Vmax: Maximum Continuous Voltage device can withstand without damage at Rated Current.
Imax: Maximum Fault Current device can withstand without damage at Rated Voltage.
Ihold: Holding Current, Maximum Current at which the device will not interrupt in 25℃ still air.
Itrip: Tripping Current, Minimum Current at which the device from low resistance to high resistance in 25℃ still air.
Pd: Typical amount of power dissipated from the device when in 25℃ still air environment.
Maximum Time-to-trip: Maximum time to trip at assigned Current.
Rmin: Minimum resistance of device in initial (un-soldered) state.
R1Max: Maximum resistance of device is measured on hour post reflow.
Rev. 1.0
www.crea-tek.com
SMD0805H Series
Thermal Derating Chart-Ih/It(A)
Part Number
Ambient Operation Temperature
-40℃ -20℃ 0℃ 25℃ 40℃ 50℃ 60℃ 70℃ 85℃
Notes: The temperature rerating data is for reference only. Please contact TLC technical support for detail temperature rerating information.
SMD080H075SF6V
I-hold 1.01 0.90 0.86 0.75 0.64 0.53 0.49 0.41 0.30
I-trip 2.03 1.80 1.73
1.50 1.28 1.05 0.98 0.83 0.60
SMD0805H100SF6V
I-hold 1.35 1.20 1.15 1.00 0.85 0.70 0.65 0.55 0.40
I-trip 2.70 2.40 2.30 2.00 1.70 1.40 1.30 1.10 0.80
SMD0805H110SF6V
I-hold 1.49 1.32 1.27 1.10 0.94 0.77 0.72 0.61 0.44
I-trip 2.97 2.64 2.53 2.20 1.87 1.54 1.43 1.21 0.88
SMD0805H150SF6V
I-hold 2.03 1.80 1.73 1.50 1.28 1.05 0.98 0.83 0.60
I-trip
4
.05 3.60 3.45 3.00 2.55 2.10 1.95 1.65 1.20
SMD0805H175SF6V
I-hold 2.36 2.10 2.01 1.75 1.49 1.23 1.14 0.96 0.70
I-trip 4.73 4.20 4.03 3.50 2.98 2.45 2.28 1.93 1.40
SMD0805H190SF6V
I-hold 2.57 2.28 2.19 1.9 1.62 1.33 1.24 1.05 0.76
I-trip 5.14 4.56 4.38 3.80 3.24 2.66 2.48 2.10 1.52
SMD0805H200SF6V
I-hold 2.70 2.40 2.30 2.00 1.70 1.40 1.30 1.10 0.80
I-trip
5
.40 4.80 4.60 4.00 3.40 2.80 2.60 2.20 1.60
SMD0805H260SF6V
I-hold 3.51 3.12 2.99 2.60 2.21 1.82 1.69 1.43 1.04
I-trip
7.02 6.24 5.98 5.20 4.42 3.64 3.38 2.86 2.08
SMD0805H260SF8V
I-hold 3.51 3.12 2.99 2.60 2.21 1.82 1.69 1.43 1.04
I-trip
7.02 6.24 5.98 5.20 4.42 3.64 3.38 2.86 2.08
SMD0805H260SF12V
I-hold 3.51 3.12 2.99 2.60 2.21 1.82 1.69 1.43 1.04
I-trip
7.02 6.24 5.98 5.20 4.42 3.64 3.38 2.86 2.08
SMD0805H300SF6V
I-hold 4.05 3.60 3.45 3.00 2.55 2.10 1.95 1.65 1.20
I-trip 8.10 7.20 6.90 6.00 5.10 4.20 3.90 3.30 2.40
SMD0805H350SF6V
I-hold 4.73 4.20 4.03 3.50 2.98 2.45 2.28 1.93 1.40
I-trip
9.45 8.40 8.05 7.00 5.95 4.90 4.55 3.85 2.80
SMD0805H380SF6V
I-hold 5.13 4.56 4.37 3.80 3.23 2.66 2.47 2.09 1.52
I-trip 10.26 9.12 8.74 7.60 6.46 5.32 4.94 4.18 3.04
SMD0805H400SF6V
I-hold 5.40 4.80 4.60 4.00 3.40 2.80 2.60 2.20 1.60
I-trip
10.80 9.60 9.20 8.00 6.80 5.60 5.20 4.40 3.20
Test item