SAFETY DATA SHEET
1. Identification
Phillyclad 620TS HardenerProduct identifier
Other means of identification
DM017H
SKU#
Not available.
Recommended use
None known.
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
ITW Performance Polymers
Address
130 Commerce Drive
Company name
Contact person
Website
Telephone
Customer Service 215-855-8450
Emergency phone number
CHEMTREC 800-424-9300
International 703-527-3887
EHS Department
E-mail
United States
www.itwperformancepolymers.com
Not available.
Montgomeryville, PA 18936
2. Hazard(s) identification
Not classified.
Physical hazards
Category 4Acute toxicity, oral
Health hazards
Category 4Acute toxicity, dermal
Category 1Skin corrosion/irritation
Category 1Serious eye damage/eye irritation
Category 1ASensitization, skin
Category 3Hazardous to the aquatic environment, acute
hazard
Environmental hazards
Category 3Hazardous to the aquatic environment,
long-term hazard
Not classified.
OSHA defined hazards
Label elements
Signal word
Danger
Hazard statement
Harmful if swallowed. Harmful in contact with skin. Causes severe skin burns and eye damage.
May cause an allergic skin reaction. Causes serious eye damage. Harmful to aquatic life. Harmful
to aquatic life with long lasting effects.
Precautionary statement
Prevention
Do not breathe mist/vapors. Wash thoroughly after handling. Do not eat, drink or smoke when
using this product. Contaminated work clothing must not be allowed out of the workplace. Avoid
release to the environment. Wear protective gloves/protective clothing/eye protection/face
protection.
Response
If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all
contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and
keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation or rash
occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse.
Storage
Store locked up.
1 / 8
Material name: Phillyclad 620TS Hardener
DM017H Version #: 02 Revision date: 06-27-2022 Issue date: 07-24-2019
SDS US
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information
89.32% of the mixture consists of component(s) of unknown acute oral toxicity. 99.99% of the
mixture consists of component(s) of unknown acute inhalation toxicity. 92.23% of the mixture
consists of component(s) of unknown acute hazards to the aquatic environment. 95.14% of the
mixture consists of component(s) of unknown long-term hazards to the aquatic environment.
3. Composition/information on ingredients
Mixtures
CAS numbe
r
%Chemical name Common name and synonyms
Fatty acids, tall-oil, reaction products with
tetraethylenepentamine
Trade SecretAmidoamine 60 - 100
3,6,9-triazaundecamethyleendiamine 112-57-23,6,9-triazaundecamethylenediamin
e
10 - 30
111-40-0Diethylenetriamine 2.5 - 10
0.1 - 1Other components below reportable levels
90-72-22,4,6-tris-(dimethylaminomethyl)-ph
enol
1 - 5
4. First-aid measures
Move to fresh air. Call a physician if symptoms develop or persist.
Inhalation
Remove contaminated clothing immediately and wash skin with soap and water. Chemical burns
must be treated by a physician. Get medical advice/attention if you feel unwell. In case of eczema
or other skin disorders: Seek medical attention and take along these instructions. Wash
contaminated clothing before reuse.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Eye contact
Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If
vomiting occurs, keep head low so that stomach content doesn't get into the lungs.
Ingestion
Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms may
include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including
blindness could result.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Chemical burns: Flush with water
immediately. While flushing, remove clothes which do not adhere to affected area. Call an
ambulance. Continue flushing during transport to hospital. Keep victim warm. Keep victim under
observation. Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves. Show this safety data sheet to the doctor in attendance. Wash contaminated
clothing before reuse.
General information
5. Fire-fighting measures
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Suitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
During fire, gases hazardous to health may be formed.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment
and precautions for firefighters
Move containers from fire area if you can do so without risk.
Fire fighting
equipment/instructions
Use standard firefighting procedures and consider the hazards of other involved materials.
Specific methods
No unusual fire or explosion hazards noted.
General fire hazards
6. Accidental release measures
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear
appropriate protective equipment and clothing during clean-up. Do not breathe mist/vapors. Do not
touch damaged containers or spilled material unless wearing appropriate protective clothing.
Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be
contained. For personal protection, see section 8 of the SDS.
Personal precautions,
protective equipment and
emergency procedures
2 / 8
Material name: Phillyclad 620TS Hardener
DM017H Version #: 02 Revision date: 06-27-2022 Issue date: 07-24-2019
SDS US