SAFETY DATA SHEET
1. Identification
DEVCON® Flexane® 80 Putty ResinProduct identifier
Other means of identification
0324
SKU#
Not available.
Recommended use
None known.
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
ITW Performance Polymers
Address
30 Endicott Street
Company name
Contact person
Website
Telephone
Customer Service 978-777-1100
Emergency phone number
Chemtrec 800-424-9300
International 703-527-3887
EHS Department
E-mail
United States
www.itwperformancepolymers.com
Not available.
Danvers, MA 01923
2. Hazard(s) identification
Not classified.
Physical hazards
Category 4Acute toxicity, inhalation
Health hazards
Category 2Skin corrosion/irritation
Category 2Serious eye damage/eye irritation
Category 1Sensitization, respiratory
Category 1ASensitization, skin
Category 2Carcinogenicity
Category 3 respiratory tract irritationSpecific target organ toxicity, single exposure
Category 2Specific target organ toxicity, repeated
exposure
Not classified.
Environmental hazards
Not classified.
OSHA defined hazards
Label elements
Signal word
Danger
Hazard statement
Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Harmful
if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause
respiratory irritation. Suspected of causing cancer. May cause damage to organs through
prolonged or repeated exposure.
Precautionary statement
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read
and understood. Do not breathe mist/vapors. Wash thoroughly after handling. Use only outdoors
or in a well-ventilated area. Contaminated work clothing must not be allowed out of the workplace.
Wear protective gloves/protective clothing/eye protection/face protection. In case of inadequate
ventilation wear respiratory protection.
1 / 8
Material name: DEVCON® Flexane® 80 Putty Resin
0324 Version #: 04 Revision date: 07-08-2021 Issue date: 04-25-2019
SDS US
Response
If on skin: Wash with plenty of water. If inhaled: Remove person to fresh air and keep comfortable
for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing. If exposed or concerned: Get medical
advice/attention. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation
persists: Get medical advice/attention. If experiencing respiratory symptoms: Call a poison
center/doctor. Take off contaminated clothing and wash it before reuse.
Storage
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information
None.
3. Composition/information on ingredients
Mixtures
CAS numbe
r
%Chemical name Common name and synonyms
N/APolyether Polyol 60 - 80
5124-30-14,4'-Methylenedicyclohexyl
diisocyanate
15 - 40
101-68-84,4'-methylenediphenyl
Diisocyanate
1 - 5
9016-87-9Diphenylmethane Diisocyanate
[isomers And Homologues]
1 - 5
1 - 2.5Other components below reportable levels
26447-40-5Methylenediphenyl Diisocyanate
(mdi)
1 - 5
4. First-aid measures
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Oxygen or
artificial respiration if needed. Do not use mouth-to-mouth method if victim inhaled the substance.
Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other
proper respiratory medical device. If experiencing respiratory symptoms: Call a poison center or
doctor/physician.
Inhalation
Remove contaminated clothing immediately and wash skin with soap and water. In case of
eczema or other skin disorders: Seek medical attention and take along these instructions. Wash
contaminated clothing before reuse.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Eye contact
Rinse mouth. Get medical attention if symptoms occur.
Ingestion
Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred
vision. May cause respiratory irritation. Coughing. Difficulty in breathing. Skin irritation. May cause
redness and pain. May cause an allergic skin reaction. Dermatitis. Rash. Prolonged exposure may
cause chronic effects.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim warm. Keep victim
under observation. Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
IF exposed or concerned: Get medical advice/attention. If you feel unwell, seek medical advice
(show the label where possible). Ensure that medical personnel are aware of the material(s)
involved, and take precautions to protect themselves. Wash contaminated clothing before reuse.
General information
5. Fire-fighting measures
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Suitable extinguishing media
Water. Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
During fire, gases hazardous to health may be formed.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment
and precautions for firefighters
Move containers from fire area if you can do so without risk.
Fire fighting
equipment/instructions
Use standard firefighting procedures and consider the hazards of other involved materials.
Specific methods
2 / 8
Material name: DEVCON® Flexane® 80 Putty Resin
0324 Version #: 04 Revision date: 07-08-2021 Issue date: 04-25-2019
SDS US