SAFETY DATA SHEET
1. Identification
DEVCON® Epoxy Coat™ 7000 AR (Acid Resistant) HardenerProduct identifier
Other means of identification
5372A
SKU#
Not available.
Recommended use
None known.
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
ITW Performance Polymers
Company name
35 Brownridge Rd
Address
Unit 1
Halton Hills, ON L7G 0C6
Customer Service
Contact person
978-777-1100
Telephone number
Fax
E-mail
800-424-9300
Emergency telephone
number
Not available.
Supplier
2. Hazard identification
Not classified.
Physical hazards
Category 4Acute toxicity, oral
Health hazards
Category 2Skin corrosion/irritation
Category 1Serious eye damage/eye irritation
Category 1Sensitization, skin
Not classified.
Environmental hazards
Label elements
Signal word
Danger
Hazard statement
Harmful if swallowed. Causes skin irritation. May cause an allergic skin reaction. Causes serious
eye damage.
Precautionary statement
Prevention
Avoid breathing mist/vapours. Wash thoroughly after handling. Do not eat, drink or smoke when
using this product. Contaminated work clothing should not be allowed out of the workplace. Wear
eye protection/face protection. Wear protective gloves.
Response
IF SWALLOWED: Call a POISON CENTRE/doctor if you feel unwell. Rinse mouth. IF ON SKIN:
Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON
CENTRE/doctor. If skin irritation or rash occurs: Get medical advice/attention. Take off
contaminated clothing and wash it before reuse.
Storage
Not available.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
1 / 6
Material name: DEVCON® Epoxy Coat™ 7000 AR (Acid Resistant) Hardener
5372A Version #: 06 Revision date: 01-August-2023 Issue date: 28-May-2019
SDS CANADA
Supplemental information
46 % of the mixture consists of component(s) of unknown acute oral toxicity. 49 % of the mixture
consists of component(s) of unknown acute dermal toxicity. 46 % of the mixture consists of
component(s) of unknown acute inhalation toxicity. 49 % of the mixture consists of component(s)
of unknown acute hazards to the aquatic environment. 46 % of the mixture consists of
component(s) of unknown long-term hazards to the aquatic environment.
Other hazards
None known.
3. Composition/information on ingredients
Mixtures
CAS numbe
r
%Chemical name Common name and synonyms
100-51-6Benzyl alcohol 40 - < 50
135108-88-2Formaldehyde, Polymer With
Benzenamine, Hydrogenated
40 - < 50
N/AOrganic acid 5 - < 10
1761-71-34,4'-methylenedicyclohexaneamine 3 - < 5
All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.
4. First-aid measures
Move to fresh air. Call a physician if symptoms develop or persist.
Inhalation
Remove contaminated clothing immediately and wash skin with soap and water. In case of
eczema or other skin disorders: Seek medical attention and take along these instructions. Wash
contaminated clothing before reuse.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention immediately.
Eye contact
Rinse mouth. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs.
Get medical advice/attention if you feel unwell.
Ingestion
Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred
vision. Permanent eye damage including blindness could result. Skin irritation. May cause redness
and pain. May cause an allergic skin reaction. Dermatitis. Rash.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim warm. Keep victim
under observation. Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves. Show this safety data sheet to the doctor in attendance. Wash contaminated
clothing before reuse.
General information
5. Fire-fighting measures
Foam. Powder. Carbon dioxide (CO2).
Suitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
During fire, gases hazardous to health may be formed.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment
and precautions for firefighters
Move containers from fire area if you can do so without risk.
Fire fighting
equipment/instructions
Use standard firefighting procedures and consider the hazards of other involved materials.
Specific methods
No unusual fire or explosion hazards noted.
General fire hazards
6. Accidental release measures
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear
appropriate protective equipment and clothing during clean-up. Avoid breathing mist/vapours. Do
not touch damaged containers or spilled material unless wearing appropriate protective clothing.
Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be
contained. For personal protection, see section 8 of the SDS.
Personal precautions,
protective equipment and
emergency procedures
2 / 6
Material name: DEVCON® Epoxy Coat™ 7000 AR (Acid Resistant) Hardener
5372A Version #: 06 Revision date: 01-August-2023 Issue date: 28-May-2019
SDS CANADA