SAFETY DATA SHEET
1. Identification
PhillyClad # 8 HardenerProduct identifier
Other means of identification
DM013H
SKU#
Not available.
Recommended use
None known.
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
ITW Performance Polymers
Address
130 Commerce Drive
Company name
Contact person
Website
Telephone
Customer Service 215-855-8450
Emergency phone number
CHEMTREC 800-424-9300
International 703-527-3887
EHS Department
E-mail
United States
www.itwperformancepolymers.com
Not available.
Montgomeryville, PA 18936
2. Hazard(s) identification
Not classified.
Physical hazards
Category 4Acute toxicity, oral
Health hazards
Category 4Acute toxicity, dermal
Category 1ASkin corrosion/irritation
Category 1Serious eye damage/eye irritation
Category 1Sensitization, skin
Category 1Reproductive toxicity
Category 3 respiratory tract irritationSpecific target organ toxicity, single exposure
Category 2Hazardous to the aquatic environment, acute
hazard
Environmental hazards
Category 2Hazardous to the aquatic environment,
long-term hazard
Not classified.
OSHA defined hazards
Label elements
Signal word
Danger
Hazard statement
Harmful if swallowed. Harmful in contact with skin. Causes severe skin burns and eye damage.
May cause an allergic skin reaction. Causes serious eye damage. May cause respiratory irritation.
May damage fertility or the unborn child. Toxic to aquatic life. Toxic to aquatic life with long lasting
effects.
Precautionary statement
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read
and understood. Do not breathe mist/vapors. Wash thoroughly after handling. Do not eat, drink or
smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated
work clothing must not be allowed out of the workplace. Avoid release to the environment. Wear
protective gloves/protective clothing/eye protection/face protection.
1 / 9
Material name: PhillyClad # 8 Hardener
DM013H Version #: 08 Revision date: 07-27-2023 Issue date: 03-03-2014
SDS US
Response
Rinse mouth. If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off
immediately all contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person
to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several
minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed or
concerned: Get medical advice/attention. If skin irritation or rash occurs: Get medical
advice/attention. Collect spillage.
Storage
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information
34.38% of the mixture consists of component(s) of unknown acute hazards to the aquatic
environment. 39.36% of the mixture consists of component(s) of unknown long-term hazards to
the aquatic environment.
3. Composition/information on ingredients
Mixtures
CAS numbe
r
%Chemical name Common name and synonyms
111-40-0Diethylenetriamine 15 - 40
TETA 112-24-3TRIETHYLENETETRAMINE 15 - 40
15 - 40Other components below reportable levels
80-05-74,4'-Isopropylidenediphenol 10 - 30
4. First-aid measures
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a poison
center or doctor/physician if you feel unwell.
Inhalation
Remove contaminated clothing immediately and wash skin with soap and water. Chemical burns
must be treated by a physician. Get medical advice/attention if you feel unwell. In case of eczema
or other skin disorders: Seek medical attention and take along these instructions. Wash
contaminated clothing before reuse.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention immediately.
Eye contact
Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If
vomiting occurs, keep head low so that stomach content doesn't get into the lungs.
Ingestion
Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms may
include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including
blindness could result. May cause respiratory irritation. Coughing.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Chemical burns: Flush with water
immediately. While flushing, remove clothes which do not adhere to affected area. Call an
ambulance. Continue flushing during transport to hospital. Keep victim warm. Keep victim under
observation. Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
IF exposed or concerned: Get medical advice/attention. If you feel unwell, seek medical advice
(show the label where possible). Ensure that medical personnel are aware of the material(s)
involved, and take precautions to protect themselves. Show this safety data sheet to the doctor in
attendance. Wash contaminated clothing before reuse.
General information
5. Fire-fighting measures
Alcohol resistant foam. Powder. Carbon dioxide (CO2).
Suitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
During fire, gases hazardous to health may be formed.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment
and precautions for firefighters
Move containers from fire area if you can do so without risk.
Fire fighting
equipment/instructions
Use standard firefighting procedures and consider the hazards of other involved materials.
Specific methods
No unusual fire or explosion hazards noted.
General fire hazards
2 / 9
Material name: PhillyClad # 8 Hardener
DM013H Version #: 08 Revision date: 07-27-2023 Issue date: 03-03-2014
SDS US