SAFETY DATA SHEET
1. Identification
PhillyClad # 8 ResinProduct identifier
Other means of identification
DM013R
SKU#
Not available.
Recommended use
None known.
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
ITW Performance Polymers
Address
130 Commerce Drive
Company name
Contact person
Website
Telephone
Customer Service 215-855-8450
Emergency phone number
CHEMTREC 800-424-9300
International 703-527-3887
EHS Department
E-mail
United States
www.itwperformancepolymers.com
Not available.
Montgomeryville, PA 18936
2. Hazard(s) identification
Not classified.
Physical hazards
Category 2Skin corrosion/irritation
Health hazards
Category 2Serious eye damage/eye irritation
Category 1Sensitization, skin
Category 2Hazardous to the aquatic environment,
long-term hazard
Environmental hazards
Not classified.
OSHA defined hazards
Label elements
Signal word
Warning
Hazard statement
Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Toxic to
aquatic life with long lasting effects.
Precautionary statement
Prevention
Avoid breathing mist/vapor. Wash thoroughly after handling. Contaminated work clothing must not
be allowed out of the workplace. Avoid release to the environment. Wear eye protection/face
protection. Wear protective gloves.
Response
If on skin: Wash with plenty of water. If in eyes: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation or rash
occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take
off contaminated clothing and wash before reuse. Collect spillage.
Storage
Store away from incompatible materials.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information
99.26% of the mixture consists of component(s) of unknown acute oral toxicity. 99.26% of the
mixture consists of component(s) of unknown acute dermal toxicity. 99.26% of the mixture
consists of component(s) of unknown acute inhalation toxicity. 99.26% of the mixture consists of
component(s) of unknown acute hazards to the aquatic environment.
1 / 8
Material name: PhillyClad # 8 Resin
DM013R Version #: 03 Revision date: 06-02-2018 Issue date: 03-03-2014
SDS US
3. Composition/information on ingredients
Mixtures
CAS number
%
Chemical name
Common name and synonyms
25068-38-6Epoxy Resin:--reaction Product Of
Bisphenol A And Epichlorohydrin
(refer To Epichlorohydrin)
60 - 100
0.1 - 1Other components below reportable levels
13463-67-7Titanium Dioxide 0.1 - 1
*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Move to fresh air. Call a physician if symptoms develop or persist.
Inhalation
Remove contaminated clothing immediately and wash skin with soap and water. In case of
eczema or other skin disorders: Seek medical attention and take along these instructions. Wash
contaminated clothing before reuse.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Eye contact
Rinse mouth. Get medical attention if symptoms occur.
Ingestion
Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred
vision. Skin irritation. May cause redness and pain. May cause an allergic skin reaction. Dermatitis.
Rash.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim under observation.
Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves. Wash contaminated clothing before reuse.
General information
5. Fire-fighting measures
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Suitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
During fire, gases hazardous to health may be formed.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment
and precautions for firefighters
Move containers from fire area if you can do so without risk.
Fire fighting
equipment/instructions
Use standard firefighting procedures and consider the hazards of other involved materials.
Specific methods
No unusual fire or explosion hazards noted.
General fire hazards
6. Accidental release measures
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear
appropriate protective equipment and clothing during clean-up. Avoid breathing mist/vapor. Do not
touch damaged containers or spilled material unless wearing appropriate protective clothing.
Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be
contained. For personal protection, see section 8 of the SDS.
Personal precautions,
protective equipment and
emergency procedures
Prevent entry into waterways, sewer, basements or confined areas.
Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is
possible. Absorb in vermiculite, dry sand or earth and place into containers. Following product
recovery, flush area with water.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to
remove residual contamination.
Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Methods and materials for
containment and cleaning up
Avoid release to the environment. Inform appropriate managerial or supervisory personnel of all
environmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge into
drains, water courses or onto the ground.
Environmental precautions
2 / 8
Material name: PhillyClad # 8 Resin
DM013R Version #: 03 Revision date: 06-02-2018 Issue date: 03-03-2014
SDS US