SAFETY DATA SHEET
1. Identification
DEVCON® Flexane® 94 Liquid Curing AgentProduct identifier
Other means of identification
6921N
SKU#
Not available.
Recommended use
None known.
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
ITW Performance Polymers
Address
30 Endicott Street
Company name
Contact person
Website
Telephone
Customer Service 978-777-1100
Emergency phone number
Chemtrec 800-424-9300
International 703-527-3887
EHS Department
E-mail
United States
www.itwperformancepolymers.com
Not available.
Danvers, MA 01923
2. Hazard(s) identification
Not classified.
Physical hazards
Category 4Acute toxicity, oral
Health hazards
Category 4Acute toxicity, dermal
Category 2ASerious eye damage/eye irritation
Category 2Specific target organ toxicity, repeated
exposure
Not classified.
Environmental hazards
Not classified.
OSHA defined hazards
Label elements
Signal word
Warning
Hazard statement
Harmful if swallowed. Harmful in contact with skin. Causes serious eye irritation. May cause
damage to organs through prolonged or repeated exposure.
Precautionary statement
Prevention
Do not breathe mist/vapors. Wash thoroughly after handling. Do not eat, drink or smoke when
using this product. Wear eye protection/face protection. Wear protective gloves/protective
clothing.
Response
If swallowed: Call a poison center/doctor if you feel unwell. Rinse mouth. If on skin: Wash with
plenty of water. If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing. Call a poison center/doctor if you feel unwell.
If eye irritation persists: Get medical advice/attention.
Storage
Not available.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information
None.
1 / 7
Material name: DEVCON® Flexane® 94 Liquid Curing Agent
6921N Version #: 06 Revision date: 10-04-2023 Issue date: 05-22-2019
SDS US
3. Composition/information on ingredients
Mixtures
CAS numbe
r
%Chemical name Common name and synonyms
68479-98-1Diethyltoluenediamine 20 - 40
60 - 80Other components below reportable levels
1333-86-4Carbon Black 0.1 - 1
4. First-aid measures
Move to fresh air. Call a physician if symptoms develop or persist.
Inhalation
Wash off with soap and water. Get medical advice/attention if you feel unwell. Get medical
attention if irritation develops and persists. Wash contaminated clothing before reuse.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Eye contact
Rinse mouth. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs.
Get medical advice/attention if you feel unwell.
Ingestion
Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred
vision. Prolonged exposure may cause chronic effects.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim warm. Keep victim
under observation. Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
If you feel unwell, seek medical advice (show the label where possible). Ensure that medical
personnel are aware of the material(s) involved, and take precautions to protect themselves. Show
this safety data sheet to the doctor in attendance.
General information
5. Fire-fighting measures
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Suitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
During fire, gases hazardous to health may be formed.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment
and precautions for firefighters
Move containers from fire area if you can do so without risk.
Fire fighting
equipment/instructions
Use standard firefighting procedures and consider the hazards of other involved materials.
Specific methods
No unusual fire or explosion hazards noted.
General fire hazards
6. Accidental release measures
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear
appropriate protective equipment and clothing during clean-up. Do not breathe mist/vapors. Do not
touch damaged containers or spilled material unless wearing appropriate protective clothing.
Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be
contained. For personal protection, see section 8 of the SDS.
Personal precautions,
protective equipment and
emergency procedures
Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is
possible. Absorb in vermiculite, dry sand or earth and place into containers. Following product
recovery, flush area with water.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to
remove residual contamination.
Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Methods and materials for
containment and cleaning up
Avoid discharge into drains, water courses or onto the ground.
Environmental precautions
7. Handling and storage
Do not breathe mist/vapors. Do not taste or swallow. Avoid contact with eyes, skin, and clothing.
Avoid prolonged exposure. When using, do not eat, drink or smoke. Provide adequate ventilation.
Wear appropriate personal protective equipment. Wash hands thoroughly after handling. Wash
contaminated clothing before reuse. Observe good industrial hygiene practices.
Precautions for safe handling
2 / 7
Material name: DEVCON® Flexane® 94 Liquid Curing Agent
6921N Version #: 06 Revision date: 10-04-2023 Issue date: 05-22-2019
SDS US