SAFETY DATA SHEET
1. Identification
PLEXUS® MA300 AdhesiveProduct identifier
Other means of identification
IT407
SKU#
Not available.
Recommended use
None known.
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
ITW Performance Polymers
Address
30 Endicott Street
Company name
Contact person
Website
Telephone
Customer Service 978-777-1100
Emergency phone number
Chemtrec 800-424-9300
International 703-527-3887
EHS Department
E-mail
United States
www.itwperformancepolymers.com
Not available.
Danvers, MA 01923
2. Hazard(s) identification
Category 2Flammable liquids
Physical hazards
Category 4Acute toxicity, dermal
Health hazards
Category 4Acute toxicity, inhalation
Category 1ASkin corrosion/irritation
Category 1Serious eye damage/eye irritation
Category 1ASensitization, skin
Category 3 respiratory tract irritationSpecific target organ toxicity, single exposure
Not classified.
Environmental hazards
Not classified.
OSHA defined hazards
Label elements
Signal word
Danger
Hazard statement
Highly flammable liquid and vapor. Harmful in contact with skin. Causes severe skin burns and
eye damage. May cause an allergic skin reaction. Causes serious eye damage. Harmful if
inhaled. May cause respiratory irritation.
Precautionary statement
Prevention
Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly
closed. Ground/bond container and receiving equipment. Use explosion-proof
electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary
measures against static discharge. Do not breathe mist/vapors. Wash thoroughly after handling.
Use only outdoors or in a well-ventilated area. Contaminated work clothing must not be allowed
out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection.
Response
If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all
contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and
keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison
center/doctor. If skin irritation or rash occurs: Get medical advice/attention. In case of fire: Use
appropriate media to extinguish.
1 / 10
Material name: PLEXUS® MA300 Adhesive
IT407 Version #: 03 Revi sion date: 10-21-2020 Issue dat e: 05-26-2019
SDS US
Storage
Keep cool. Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise
classified (HNOC)
Static accumulating flammable liquid can become electrostatically charged even in bonded and
grounded equipment. Sparks may ignite liquid and vapor. May cause flash fire or explosion.
Supplemental information
None.
3. Composition/information on ingredients
Mixtures
CAS numbe
r
%Chemical name Common name and synonyms
80-62-6Methyl Methacrylate 40 - 60
68037-39-8CHLOROSULFINATED
POLYETHLENE
20 - 40
10 - 20Other components below reportable levels
79-41-4METHACRYLIC ACID 2.5 - 10
4. First-aid measures
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Oxygen or
artificial respiration if needed. Call a poison center or doctor/physician if you feel unwell.
Inhalation
Remove contaminated clothing immediately and wash skin with soap and water. Call a physician
or poison control center immediately. Chemical burns must be treated by a physician. Wash
contaminated clothing before reuse.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Call a physician or poison control center immediately.
Eye contact
Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If
vomiting occurs, keep head low so that stomach content doesn't get into the lungs.
Ingestion
Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms may
include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including
blindness could result. May cause respiratory irritation.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Thermal burns: Flush with water
immediately. While flushing, remove clothes which do not adhere to affected area. Call an
ambulance. Continue flushing during transport to hospital. Chemical burns: Flush with water
immediately. While flushing, remove clothes which do not adhere to affected area. Call an
ambulance. Continue flushing during transport to hospital. Keep victim warm. Keep victim under
observation. Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
Take off all contaminated clothing immediately. If you feel unwell, seek medical advice (show the
label where possible). Ensure that medical personnel are aware of the material(s) involved, and
take precautions to protect themselves. Show this safety data sheet to the doctor in attendance.
Wash contaminated clothing before reuse.
General information
5. Fire-fighting measures
Water fog. Foam. Carbon dioxide (CO2). Dry chemical powder, carbon dioxide, sand or earth may
be used for small fires only.
Suitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
Vapors may form explosive mixtures with air. Vapors may travel considerable distance to a source
of ignition and flash back. This product is a poor conductor of electricity and can become
electrostatically charged. If sufficient charge is accumulated, ignition of flammable mixtures can
occur. To reduce potential for static discharge, use proper bonding and grounding procedures.
This liquid may accumulate static electricity when filling properly grounded containers. Static
electricity accumulation may be significantly increased by the presence of small quantities of water
or other contaminants. Material will float and may ignite on surface of water. During fire, gases
hazardous to health may be formed.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment
and precautions for firefighters
In case of fire and/or explosion do not breathe fumes. Move containers from fire area if you can do
so without risk.
Fire fighting
equipment/instructions
Use standard firefighting procedures and consider the hazards of other involved materials.
Specific methods
Highly flammable liquid and vapor.
General fire hazards
2 / 10
Material name: PLEXUS® MA300 Adhesive
IT407 Version #: 03 Revi sion date: 10-21-2020 Issue dat e: 05-26-2019
SDS US