SAFETY DATA SHEET
1. Identification
Repair Compound HardenerProduct identifier
Other means of identification
DM004H
SKU#
Not available.
Recommended use
Workers (and your customers or users in the case of resale) should be informed of the potential
presence of respirable dust and respirable crystalline silica as well as their potential hazards.
Appropriate training in the proper use and handling of this material should be provided as required
under applicable regulations.
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
ITW Performance Polymers
Address
130 Commerce Drive
Company name
Contact person
Website
Telephone
Customer Service 215-855-8450
Emergency phone number
CHEMTREC 800-424-9300
International 703-527-3887
EHS Department
E-mail
United States
www.itwperformancepolymers.com
Not available.
Montgomeryville, PA 18936
2. Hazard(s) identification
Not classified.
Physical hazards
Category 4Acute toxicity, oral
Health hazards
Category 4Acute toxicity, dermal
Category 2Skin corrosion/irritation
Category 2Serious eye damage/eye irritation
Category 1Sensitization, skin
Category 1Specific target organ toxicity, repeated
exposure
Category 3Hazardous to the aquatic environment, acute
hazard
Environmental hazards
Category 3Hazardous to the aquatic environment,
long-term hazard
Not classified.
OSHA defined hazards
Label elements
Signal word
Danger
Hazard statement
Harmful if swallowed. Harmful in contact with skin. Causes skin irritation. May cause an allergic
skin reaction. Causes serious eye irritation. Causes damage to organs through prolonged or
repeated exposure. Harmful to aquatic life. Harmful to aquatic life with long lasting effects.
Precautionary statement
Prevention
Do not breathe dust/fume/gas/mist/vapors/spray. Wash thoroughly after handling. Do not eat,
drink or smoke when using this product. Contaminated work clothing must not be allowed out of
the workplace. Avoid release to the environment. Wear eye protection/face protection. Wear
protective gloves/protective clothing.
1 / 8
Material name: Repair Compound Hardener
DM004H Version #: 06 Revision date: 06-20-2018 Issue date: 03-04-2014
SDS US
Response
If swallowed: Call a poison center/doctor if you feel unwell. Rinse mouth. If on skin: Wash with
plenty of water. If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing. Get medical advice/attention if you feel unwell.
If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical
advice/attention. Take off contaminated clothing and wash before reuse.
Storage
Store away from incompatible materials.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information
92.77% of the mixture consists of component(s) of unknown acute oral toxicity. % of the mixture
consists of component(s) of unknown acute inhalation toxicity. 95.07% of the mixture consists of
component(s) of unknown acute hazards to the aquatic environment. 95.07% of the mixture
consists of component(s) of unknown long-term hazards to the aquatic environment.
3. Composition/information on ingredients
Mixtures
CAS number
%
Chemical name
Common name and synonyms
14807-96-6Talc 30 - 60
Trade SecretAmidoamine 10 - 30
112-57-23,6,9-triazaundecamethylenediamin
e
1 - 5
112945-52-5Silicon Dioxide 1 - 5
10 - 30Other components below reportable levels
14808-60-7Quartz 0.1 - 1
*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Move to fresh air. Call a physician if symptoms develop or persist.
Inhalation
Remove contaminated clothing immediately and wash skin with soap and water. Get medical
advice/attention if you feel unwell. In case of eczema or other skin disorders: Seek medical
attention and take along these instructions. Wash contaminated clothing before reuse.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Eye contact
Rinse mouth. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs.
Get medical advice/attention if you feel unwell.
Ingestion
Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred
vision. Skin irritation. May cause redness and pain. May cause an allergic skin reaction. Dermatitis.
Rash. Prolonged exposure may cause chronic effects.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim warm. Keep victim
under observation. Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
If you feel unwell, seek medical advice (show the label where possible). Ensure that medical
personnel are aware of the material(s) involved, and take precautions to protect themselves. Show
this safety data sheet to the doctor in attendance. Wash contaminated clothing before reuse.
General information
5. Fire-fighting measures
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Suitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
During fire, gases hazardous to health may be formed.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment
and precautions for firefighters
Use water spray to cool unopened containers.
Fire fighting
equipment/instructions
Use standard firefighting procedures and consider the hazards of other involved materials.
Specific methods
No unusual fire or explosion hazards noted.
General fire hazards
2 / 8
Material name: Repair Compound Hardener
DM004H Version #: 06 Revision date: 06-20-2018 Issue date: 03-04-2014
SDS US