www.eaton.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright

2022 Eaton

326

Champ FMV nR

floodlights

Cl. I, Div. 2, Groups A, B, C, D

Cl. I, Zone 2, AEx nR II

Marine & Wet Locations

NEMA Type 4X, IP66

The Champ

FMV nR floodlight offers

exceptional illumination in industrial areas,

both indoors and out. And, it comes

standard as a restricted breathing luminaire.

The Champ FMV nR is easily adjusted to aim

light where it’s needed and is available in a

wide variety of energy saving mogul base

HID light sources and wattages.

Applications:

• Oil and gas refineries, drilling rigs,

petrochemical facilities, food and beverage

facilities, platforms, loading docks,

tunnels, outdoor wall and stanchion

mounted general area lighting, and where

flammable vapors, gases, ignitable dusts,

fibers or flyings are present

• Classified and hazardous locations or

where extremely corrosive, wet, dusty,

hot and/or cold conditions exist

• IP66, Type 4X, marine, wet locations and

hose down environments

Features:

• AEx nR, Ex nR restricted breathing

rating is standard – a hazardous location

luminaire without additional accessories or

options; restricted breathing offers cooler

T-codes for increased hazardous locations

suitability

• NEMA 7x6 butterfly beam floodlight

pattern – wide, uniform and far-reaching to

provide excellent efficiency and more light

where you need it

• NEMA Type 4X and IP66 construction is

designed for use indoors and outdoors in

marine and wet locations – with stainless

steel external hardware suitable for salt

water and corrosive applications

• Easy wiring – standard terminal block

with marked terminals saves time and

eliminates wiring errors

• Vaportight sealing cable connector –

standard

• Will accommodate existing mounting

hardware – SFA6 slipfitter for pole and

SWB6 for wall mount

• +40°C and +55°C ambient suitability –

addresses high ambients common at

industrial facilities

• Low ambient capability to -40°C – perfect

for colder climates

• Heavy duty, die cast copper-free

aluminum enclosure with epoxy coating

and stainless steel hardware – provides

a robust design with industrial grade

construction and corrosion resistance

• Hinged door frame assembly – has captive

cover screws for ease of relamping

• Yoke mount design – standard

construction provides the greatest

mounting flexibility; can be mounted

vertically (wall), horizontally (rooftop or

floor) or any angle in between

• 3-axis resonance withstand and UL844

vibration compliant – can stand up to the

tough jobs

• Precision formed aluminum reflector –

superior beam control, distribution and

efficiency

• Multi-tap ballasts – offering a choice of

120, 208, 240, 277V; 220V, 50 Hz; 240V,

50 Hz; tri-tap (120, 277, 347V); and 480V

ballasts are also available

• For use with SFA6 slipfitter adapter and

SWB6 wall mount bracket accessories –

further enhances mounting flexibility

Standard materials:

• Fixture housing and door frame

assembly – die cast aluminum

• External hardware – stainless steel

• Lens – heat- and impact-resistant

tempered glass

• Yoke �� aluminum

Standard finishes:

• Enclosure and yoke – Corro-free epoxy

powder coat

• Stainless steel – natural

Electrical ratings:

Sources/wattages (mogul base lamps):

• High pressure sodium (HPS) – 150, 250,

400W

• Metal halide (MH) – 175, 250, 400W

Voltages:

Standard voltage ballasts

• Multi-tap (120, 208, 240, 277V, 60 Hz)

• Dual-tap (120, 277V)

• 480V, 60 Hz

• Tri-tap (120, 277, 347V, 60 Hz) (for

Canada)

Optional voltage ballasts

• 220V or 240V, 50 Hz (for export)

Hub sizes:

• Standard –

/4” NPT

• Optional – 25mm (M25 x 1.5) or 20mm

(M20 x 1.5)

Certifications and

compliances:

NEC/CEC (NEC ballast gear and socket):

• Class I, Division 2, Groups A, B, C, D

• Class I, Zone 2, AEx nR II

• Marine and wet locations

• NEMA Type 4X, IP66

UL/cUL standards:

• UL844 – Hazardous (Divisions Classified)

Locations

• UL60079-15

• UL1598 – Luminaires

• UL1598A – Supplemental Requirements

for Luminaires for Installation on Marine

Vessels

IEC standard:

• 60079-15

Features (continued):

The only full frame trunnion mount

floodlight with a T3 rating and a

removable ballast tray assembly

• Removable ballast tray

• Pre-wired to terminal blocks

• Substantial room for wiring

Easy to install and

maintain:

Photometrics:

• Refer to www.eaton.com (under the

Resources tab of each product family) for

specific photometric IES files

www.eaton.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright

2022 Eaton

327

Wattage

150

150W (HPS only)

175

175W (MH only)

250

250W

400

400W

Ordering information:

Part number example

FMVMY400/MT 76 M25

Series

FMV

Mount

Yoke

Options

See full listing below

Lamp type

Metal halide

High pressure sodium

FMV M Y 400 /MT 76 M25

APhotocell for Division 2 installation only. Not suitable for Class I, Zone 2.

Voltage

Dual-tap

Tri-tap

Multi-tap

480

480V

Beam spread

NEMA 7x6

butterfly beam

pattern

Options:

Suffix

• Instant restrike and Ballast-Gard ..................................................TIR

Instant restrike – enables a hot HPS lamp to immediately restrike after a

momentary loss of arc due to voltage fluctuation or power outage

Ballast-Gard starter cut-out switch – prevents starter pulsing when lamp is

cycling or inoperative; prolongs ballast and ignitor life

150W LX HPS only

• Factory assembled with HID lamp installed .................................. FA

• Fused ......................................................................................... S658

Not suitable for marine applications

• 20mm metric thread for conduit opening .................................. M20

• 25mm metric thread for conduit opening .................................. M25

• Furnished with lamps (not installed) .......................................... S714

• Retention chain .......................................................................... S831

• Pulse start metal halide ............................................................. S828

• Enclosure machined with two conduit/cable entries ................ S886

Photocells installedA:

• 120V, 50-60 Hz ..................................................................... V2PC20

• 208-240V, 50-60 Hz .............................................................. V2PC22

• 277V, 50-60 Hz ..................................................................... V2PC27

Description

Accessories (ordered separately):

Cat. #

• Slipfitter adapter .......................................................................SFA6

To be mounted to yoke mount fixture

Fits onto 2” pipe/conduit

• Wall bracket ............................................................................ SWB6

Use with slipfitter adapter SFA6 for easy wall mounting and increased

adjustability

• Bull horn, 2 tenon, gray .........................................................BLHN2