WS722377
Will Semiconductor Ltd. 1 2023/09/09 Rev.1.1
WS722377
13MHz Low Noise CMOS Operational
Amplifiers
Descriptions
WS722377 is wide bandwidth CMOS amplifier that
provides very low noise, low input bias current, and low
offset voltage while operating on a low quiescent
current of 1.3mA per channel.
WS722377 is optimized for low voltage, single supply
applications. The exceptional combination of ac and dc
performance make them ideal for a wide range of
applications, including small signal conditioning, audio,
and active filters. In addition, these parts have a wide
supply range with excellent PSRR, making them
attractive for applications that run directly from
batteries without regulation.
The WS722377 is available with MSL 3 Level in
SOP-8L, MSOP-8L and DFN3x3-8L packages.
Standard products are Pb-Free and halogen-Free.
Features
Gain Bandwidth Product : 13.7 MHz
Low Noise @1kHz : 7 nV/Hz
Offset Voltage : 25 uV
Input Bias Current : 5 pA
Quiescent Current per OPA : 1.3 mA
Supply Voltage Range
: 2.1~5.5 V
Rail-to-Rail Output Swing
Unity Gain Stable
EMI Input Filtering
-40°C to 125°C Operation Range
Applications
Photo Diode Pre-Amp
Piezoelectric Sensor Pre-Amp
Sensor Signal Conditioning
Audio Equipment
Active Filter
Http://www.omnivision-group.com
SOP-8L MSOP-8L DFN2x2-8L
SOP-8L/MSOP-8L DFN2x2-8L
Pin configuration (Top view)
SOP-8L
2 3 7 7
GMYW
MSOP-8L DFN2x2-8L
Marking
2377 = Device code
SS, XM, GD = Special code
Y = Year code
M = Month code
W = Week code
Order information
Device Package Shipping
WS722377S-8/TR SOP-8L
4000/Reel
&Tape
WS722377M-8/TR MSOP-8L
4000/Reel
&Tape
WS722377DA-8/TR DFN3x3-8L
3000/Reel
&Tape
WS722377
Will Semiconductor Ltd. 2 2023/09/09 Rev.1.1
Pin Descriptions
Pin Number Symbol Descriptions
1 OUTA Output A
2 -INA Inverting input A
3 +INA Non-inverting input A
4 V- Negative supply
5 +INB Non-inverting input B
6 -INB Inverting input B
7 OUTB Output B
8 V+ Positive supply
Absolute Maximum Ratings
Parameter Value Unit
Supply Voltage, V
S
= (V+) - (V-) 6 V
Single Input Terminals Voltage
(2)
6 V
Output Short-Circuit
(3)
135 mA
Operating Temperature, T
A
-40~150 °C
Storage Temperature, T
A
-40~150 °C
Junction Temperature, T
J
-40~150 °C
ESD Rating
Human Body Model 8000 V
Charged Device Model 2000 V
Machine Model 300 V
Note:
1. Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions
for extended periods may degrade device reliability. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those specified is not supported.
2. Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V
beyond the supply rails should be current limited to 10mA or less.
3. Short-circuit to ground, one amplifier per package. Differential voltages are at +IN with respect to -IN.