AiPi-DSL 2.4-inch screen test firmware use tutorial
AiPi-DSL (AiPi-DSL) is a screen drive development board designed by Ai-Thinker open-source team for
the Ai-M61-32S module. It supports 2.8/3.5-inch 30Pin SPI display screens, 2.4/1.28-inch 18 pin SPI
display screens.
This project is to realize the music player interface on the 2.4-inch display screen.
1. Burning firmware
1.1Serial port cable wiring
TTL TOOL
AiPi
3.3V
3.3V
TXD
RX
RXD
TX
GND
GND
1.2 Burning
Download burning tool：click to download
Firmware：click to download
After the burning tool begins burning, first keep press the "download button" and then press the "reset
button" and to release, then you can enter the burning mode.
The operation steps are performed as below:
Note：After the firmware is burned, you need to press the reset button for one time, then the program can
be run.
2. Use steps
AiPi-DSL 2.4-inch screen music player Demo
2.1 Instructions
The music player Demo has two interfaces: the homepage and the playlist page. The homepage mainly
shows the singer's photo, the music beat animation and the basic music control buttons, and the playlist
page mainly shows the names of all the songs.